Table of Contents
Advertisement
8. Spare Parts List
The spare parts are classified into 2 distinct categories:
• The 1st emergency parts:
The 1st emergency parts are strategic elements which are not necessarily consumables but which in case of
failure prohibit the operation of the machine.
Depending on the commitment of the painting line and the production rates imposed, the 1st emergency parts
are not necessarily kept available in the customer's stock.
Indeed, if an interruption of the production flow is possible, storage is not necessary.
However, if a stop is not possible, the 1st emergency parts will be kept in stock.
• Wear parts:
Wear parts are consumable items such as O-rings that undergo regular degradation over time during normal
operation of the installation. It is therefore advisable to replace them according to a defined frequency and
adapted to the operating time of the installation.
The wearing parts must therefore be kept in the customer's stock.
In order to ensure optimum assembly, spare parts should be stored at a temperature close to
their operating temperature. If not, a sufficient waiting time must be observed before
installation, so that all parts are assembled at the same temperature.
Member of Exel group
99
DRT582350110
A - 2023/10
Advertisement
Table of Contents
