SAMES KREMLIN Cyclix 200 L Instruction Manual page 93

• Step 6:
Install the ring (8.3.1.2) on the agitator rod (7.1.2).
• Step 7:
Place the agitator axis supports (8.3.1.1) on the agitator
rod (7.1.2) as well as the suction rod (8.1).
Tighten the 4 screws (8.3.1.3), the 8 washers (8.3.1.4 &
8.3.1.5) and the 4 nuts (8.3.1.6) by means of a 10 mm flat
wrench and of a n°5 hex key.
Member of Exel group
8.3.1.5
8.3.1.4
8.3.1.6
93
7.1.2
8.3.1.2
8.3.1.1
8.3.1.1
8.1
7.1.2
DRT582350110
A - 2023/10
8.3.1.3