Table of Contents
Advertisement
• Step 4:
Disconnect the ram (1) air supply hose from the
compressed air network (0 bar / 0 psi).
• Step 5:
Untighten the 2 washers (1.1) and the 2 screws (1.2) from
the plate and the counterplate of the ram (1) by means of
a 8 mm flat wrench.
Remove the cover (6) from the ram (1).
• Step 6:
Disconnect the 2 air supply hoses from the control (2) ram
(1).
Disconnect the quick release coupling of the air supply
hose (7.2) from the control (2) ram (1).
Member of Exel group
6
6
7.2
42
0 bar / 0 psi
1
1.1
1.2
2
1
1
1
2
1
2
DRT582350110
A - 2023/10
Advertisement
Table of Contents
