Table of Contents
Advertisement
DocuSign Envelope ID: D3302247-E9A5-40FD-920F-3D349626DB5B
(1)
The manufacturer herewith declares that the equipment is in conformity with the UK statutory requirements.
(2)
Equipment type
(3)
Applicable Directives
(9)
Approved body
(10)
This partly completed machinery must not be put into service until the final machinery in which it is to
be incorporated has been declared in conformity with Supply of Machinery (Safety) Regulations 2008.
Sames is allowed to compil the technical documentation.
Sames undertakes to transmit, in response to a reasoned request by the national authorities, relevant
information on the partly completed machinery in the most appropriate form. This declaration of
incorporation of partly completed machinery and this declaration of conformity are issued under the sole
responsibility of the manufacturer.
Director of the STAINS site - Executive Management (EM)
Hervé WALTER
Established in Stains, on
Siège Social / Headquarter: 13, chemin de Malacher - CS70086 - 38243 Meylan Cedex - France - Tél / Phone: +33 (0)4 76 41 60 60
CYCLIX AGITATOR_200L / 10.6 US GAL DRUMS_WITH PTM MOTOR
The essential health and safety requirements mentioned in Supply of Machinery (Safety)
2008 No 1597
Regulations 2008 have been applied.
Articles: 1.1, 1.1.5, 1.2.4, 1.2.4.1, 1.3, 1.3.4, 1.3.7, 1.3.8.1, 1.3.8.2, 1.3.9, 1.5, 1.5.5,
1.5.7, 1.5.8, 1.5.9, 1.5.15, 1.6, 1.6.1, 1.7, 1.7.4.2
(5)
That partly completed machinery is also in conformity with the provisions of
(6)
Marking
2016 No. 1107
(7)
Harmonised
standards
(8)
Conformity
assessment
procedure
2016 No. 1092
CML 2503 - Ellesmere Port - United Kingdom / CML N°
13/12/2023
SAS au capital de 12.720.000 euros | RCS Grenoble: 572 051 688 | Code APE: 2829B | TVA intracom: FR36 572051688
info@sames.com
-
www.sames.com
DECLARATION OF INCORPORATION
OF PARTLY COMPLETED MACHINERY
UK DECLARATION OF CONFORMITY
(4)
The relevant technical documentation was compiled
as specified in annex VII, part B.
CYCLIX AGITATOR_200L / 10.6 US GAL DRUMS_PTM MOTOR
WITH ELEVATOR
II2G Ex h IIB T6 Gb X
CYCLIX AGITATOR_200L / 10.6 US GAL DRUMS_PTM MOTOR
II1/2G Ex h IIC T6 Ga/Gb X
II1/2D Ex h IIIC T85°C Da/Db X
Ex h => Protection par sécurité de construction (c)
/ Protection by constructional safety (c)
Conditions spéciales d'utilisation, le signe X indique de se référer
aux prescriptions figurant dans le manuel d'instructions qui
accompagnent le produit.
Specific conditions of use, X indicates to refer to the prescriptions
specified in the instructions manual that accompanies the
product.
EN ISO 80079-36 : 2016
EN ISO 80079-37 : 2016
EN 1127-1 : 2019
Module A Technical documentation (Annex VIII)
The Simple Pressure Vessels (Safety) Regulations 2016
Sames
1
| Société d'EXEL Industries / EXEL Industries company
DEC UK 578167130
Advertisement
Table of Contents
