1. Health and safety instructions
1.1. Configuration of the certified equipment
This manual defines the configuration of the certified equipment.
1.2. Marking
1.2.1. Description of the nameplate marking
Each device is marked with the name of the manufacturer, the device reference and important informations for the
use of the device: air pressure, electrical power,...
If you purchase an agitator unit without a ram, it can be installed in zone 0.
On the other hand, an agitator unit with a ram must be installed in zone 1.
This equipment therefore complies with the following provisions:
• ATEX Directive (2014/34/EU) :
II 2 G - group II, category 2, gas) for the ram,
II 1/2 GD - group II, categories 1 and 2, gas, dusts) for the agitator motor.
The EU declaration of conformity and the UKCA declaration (specific for the Bristish market) are included in this
document in annexes.
Member of Exel group
6
DRT582350110
A - 2023/10