M5640SU, M5640DT-SU, WSM
[2] DISASSEMBLING PLANETARY GEAR
Rear Axle Case
1. Remove the brake rod (1)
2. Remove the differential lock rod. (If separating right side.)
3. Remove the rear axle case mounting screws and nuts.
4. Support the rear axle with nylon lift strap and hoist.
5. Separate the rear axle case (2) from transmission case.
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint
face of the rear axle case and transmission case, after eliminate
the water, oil and stuck liquid gasket.
Rear axle case mounting
Tightening torque
screw and nut
(1) Brake Rod
Planetary Gear Support
1. Remove the brake plate (1).
2. Remove the external snap ring (3).
3. Carefully remove the planetary gear support (2).
(1) Brake Plate
(2) Planetary Gear Support
4-S6
REAR AXLE
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
(2) Rear Axle Case
9Y1210365RAS0005US0
(3) External Snap Ring
9Y1210365RAS0006US0
KiSC issued 07, 2009 A