Rear Wheels - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

(3) Rear Wheels

Tread (a)
1320 mm
14.9-28
52.0 in.
16.9-28 –
1500 mm
21.5L-16.1
59.1 in.
1540 mm
16.9-24, R4
60.6 in.
(1) Rear Wheel Mounting Nut
(2) Rear Disc Mounting Nut
Rear tread width can be adjusted as shown with the standard
equipped tires.
To change the tread width
1. Remove the wheel rim and / or disc mounting bolts.
2. Change the position of the rim and disc (right and left) to the
desired position, and tighten the bolts.
IMPORTANT
• Always attach wheels as shown in the figure.
• If not attached as illustrated, transmission parts may be
damaged.
• When re-fitting or adjusting a wheel, tighten the bolts to the
following torques then recheck after driving the tractor 200
m (200 yards) and thereafter according to service interval.
(Refer to "7. CHECK AND MAINTENANCE" in this section.)
Tightening torque
Tightening torque
A B
1420 mm
55.9 in.
Tread (a)
(3) Rear Wheel Disc
Rear wheel
mounting nut
Rear disc mounting nut
(steel disc) (4WD)
C
1520 mm 1620 mm
59.8 in. 63.8 in.
(4) Rear Wheel Rim
G-61
GENERAL
259.9 to 304.0 N·m
M16 26.5 to 31.0 kgf·m
191.7 to 224.2 lbf·ft
244 N·m
24.9 kgf·m
180 lbf·ft
D E
1720 mm
67.7 in.
(a) Tread
9Y1210365GEG0085US0
KiSC issued 07, 2009 A