Kubota M5640SU Workshop Manual page 195

M5640SU, M5640DT-SU, WSM
Shift Levers and Shift Rods (Auxiliary Shift Change H, R-L)
1. Remove the spring pin (1) and (2).
2. Remove the lock screw (3) and (4), then remove the balls (7)
and springs (16).
3. Remove the stopper plate (5) and (6).
4. Remove the shift lever (H) (8) and (L-R) (7).
5. Remove the spring pin (10) and (11).
6. Set the shift rod (H) (11) and (L-R) (12) at neutral position.
7. Remove the shift rod (H) (11) and (L-R) (12).
(When reassembling)
• Be sure to assemble the ball (15) for inter lock, balls (17) for
detent and spring (16).
• Apply grease to the O-rings.
• Apply liquid lock (Three Bond 1206C or equivalent) the lock
screw (3) and (4).
(1) Spring Pin
(2) Spring Pin
(3) Lock Screw
(4) Lock Screw
(5) Stopper Plate
(6) Stopper Plate
(7) Shift Lever (L-R)
(8) Shift Lever (H)
(9) Shift Fork (H)
3-S8
TRANSMISSION
(10) Spring Pin
(11) Shift Rod (H)
(12) Shift Rod (L-R)
(13) Spring Pin
(14) Spring Pin
(15) Ball (Inter Lock)
(16) Spring (Detent)
(17) Ball (Detent)
9Y1210365TRS0036US0
KiSC issued 07, 2009 A