Pto System - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

3. PTO SYSTEM

All models have Live PTO's (Independent PTO's) which have their own clutch controls completely separate from
the travelling clutch and transmission.
Therefore, the PTO can operate while the tractor is stopped and also the PTO can be disengaged and engaged
while the tractor is in motion.
The PTO system offers 540 min
(1) PTO Propeller Shaft
(2) PTO Clutch
By operating the PTO clutch lever from "OFF" to "ON" position to engage the PTO clutch (2), the PTO propeller
shaft (1) is connected to the gear shaft (3) through PTO propeller shaft 2 (3).
So the rotation of PTO propeller shaft (1) is transmitted to the gear shaft (3), the power is transmitted as follows.
PTO Propeller Shaft (1) → PTO Clutch (2) → PTO Propeller Shaft 2 (3) → 12T Gear Shaft (4) → 51T Gear (5) →
PTO Shaft (6).
-1
(rpm) on the rear PTO speed.
(3) PTO Propeller Shaft 2
(4) 12T Gear Shaft
(5) 51T Gear
3-M8
TRANSMISSION
(6) PTO Shaft
9Y1210365TRM0012US0
KiSC issued 07, 2009 A