Checking And Adjusting; Auxiliary Shift Lever - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

4. CHECKING AND ADJUSTING

[1] AUXILIARY SHIFT LEVER

Checking Function of Auxiliary SHift
1. Check the function of the main gear shift.
• Neutral position to H gear position.
• Neutral position to L gear position.
• Neutral position to R gear position.
• Neutral position to L gear position.
2. If shifting is not smooth, check the length of shift rod L1 and shift
rod L2.
3. Set the auxiliary shift lever (1) to neutral position and check the
clearance A at stopper (2) is same clearance.
If the clearance A is not same, adjust the shift rod length.
4. Select the auxiliary shift lever to the R-L side, and check the
clearance B is same clearance.
If the clearance B is not same, adjust the shift rod for R-L length.
And then adjust the shift rod length H side, so that the H side
clearance B is same.
Shift rod length L1 and
Factory spec.
L2
(1) Auxiliary Shift Lever
3-S4
TRANSMISSION
Approx.
209 mm
8.23 in.
(2) Stopper
9Y1210365TRS0032US0
KiSC issued 07, 2009 A