Kubota M5640SU Workshop Manual page 56

M5640SU, M5640DT-SU, WSM
Valve Guide Replacing Tool
Application
• Use to press out and press fit the valve guide.
NOTE
• These special tools are not provided, so make it referring to
the figure.
A 20 mm dia. (0.79 in. dia.)
B 11.7 to 11.9 mm dia. (0.460 to 0.468 in. dia.)
C 6.5 to 6.6 mm dia. (0.256 to 0.259 in. dia.)
D 225 mm (8.86 in.)
E 70 mm (2.76 in.)
F 45 mm (1.77 in.)
G 25 mm dia. (0.98 in. dia.)
H 5 mm (0.197 in.)
I 6.7 to 7.0 mm dia. (0.263 to 0.275 in. dia.)
J 20 mm dia. (0.787 in. dia.)
K 12.5 to 12.8 mm dia. (0.492 to 0.504 in. dia.)
L 8.9 to 9.1 mm (0.350 to 358 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
Engine Stand
Application
• Use to support engine.
NOTE
• This special tool is not provided, so make it referring to the
figure.
A 480 mm (18.90 in.)
B 50 mm (1.97 in.)
C 108.5 mm (4.272 in.)
D 263 mm (10.35 in.)
E 12.5 mm (0.492 in.)
F 237.5 mm (9.350 in.)
G 142.5 mm (5.610 in.)
H 95 mm (3.74 in.)
I 4.14 mm dia. (0.55 in. dia.)
J 40 mm (1.57 in.)
K 210 mm (8.27 in.)
L 190 mm (7.48 in.)
M 100 mm (3.94 in.)
N 6 mm (0.24 in.)
O 6 mm (0.24 in.)
P 25 mm dia. (0.98 in. dia.)
C10 Chamfer 10 mm (0.394 in.)
G-40
GENERAL
9Y1210365GEG0065US0
9Y1210365GEG0066US0
KiSC issued 07, 2009 A