Shift Linkage Mechanism - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

[4] SHIFT LINKAGE MECHANISM

Shift Levers
The main shift laver (1) is located on clutch housing
case.
The auxiliary speed shift lever (2) is located left side
of side of the seat.
(1) Main Shift Lever
Main Gear Shift
The links are connected from the shift lever (5) to the
shift forks (1) and (2) as shown in the left figure. Each
speed from the 1st to 4th can be change by shift lever
(5).
When the shift lever (5) is move to the left, the shift
lever is engaged with the 1-2 shift fork (1), allowing the
operator to change the 1st or 2nd speed.
When the shift lever (5) is move to the right, the shift
lever is engaged with the 3-4 shift fork (2), allowing the
operator to change the 3rd or the 4th speed.
(1) 1-2 Shift Fork
(2) 3-4 Shift Fork
(3) Shift Rod 1
Auxiliary Speed Shift Lever
The links from the shift lever (1) to the shift fork (2)
and (3) are connected as shown in the left figure.
When the shift lever (1) is moved to the left, the shift
arm (4) is engaged with the L-R shift fork (2), allowing
the operator to change the Low speed or reverse speed.
When the shift lever (1) is moved to the right, the shift
arm (5) is engaged with the H shift fork (3), allowing the
operator to change the Hi speed.
(1) Shift Lever
(2) L-R Shift Fork
(3) H Shift Fork
3-M6
TRANSMISSION
(2) Auxiliary Speed Shift Lever
9Y1210365TRM0008US0
(4) Shift Rod 2
(5) Shift Lever
9Y1210365TRM0009US0
(4) Shift Arm
(5) Shift Arm
9Y1210365TRM0010US0
KiSC issued 07, 2009 A