M5640SU, M5640DT-SU, WSM
Sleeve and Spool
1. Draw out the dowel pin (1).
2. Draw out the spool (3) from the sleeve (2).
3. Push out the centering spring (4).
IMPORTANT
• As the clearance between the sleeve (2) and spool (3) is
very narrow, draw out the spool by turning it slowly with
due care.
(When reassembling)
• For easier assembly, first insert a couple of centering springs
assembled back to back and then fit springs in one after
another.
• Align the centering spring notch with the sleeve notch.
(1) Dowel Pin
(2) Sleeve
7-S11
STEERING
(3) Spool
(4) Centering Spring
9Y1210365STS0013US0
KiSC issued 07, 2009 A