Tightening Torques - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : Refer to "6. TIGHTENING TORQUES" at GENERAL Section.)
Clutch mounting screw
Release fork setting screw
PTO clutch control valve mounting screw
Rear wheel mounting nut
ROPS under frame mounting bolt and nut (M6, 9T)
Clutch housing and transmission case mounting screw,
nut (M12, grade 11 nut)
Clutch housing and transmission case mounting screw,
nut (M12, grade 7 screw, nut)
Clutch housing and transmission case mounting screw,
nut (M10, grade 9 screw)
Transmission upper cover mounting screw
PTO clutch case bearing holder mounting screw
Brake plate mounting screw
Item N·m
24 to 27
167 to 191 17.0 to 19.5
24 to 27
260 to 304 26.5 to 31.0
260 to 304 26.5 to 31.0
103 to 117 10.5 to 12.0
78 to 90
61 to 70
24 to 27
24 to 27
9.81 to 11.2 1.00 to 1.15
2-S4
CLUTCH
kgf·m lbf·ft
2.4 to 2.8 18 to 20
123 to 141
2.4 to 2.8 18 to 20
192 to 224
192 to 224
76.0 to 86.7
7.9 to 9.2 58 to 66
6.2 to 7.2 45 to 52
2.4 to 2.8 18 to 20
2.4 to 2.8 18 to 20
7.24 to 8.31
9Y1210365CLS0003US0
KiSC issued 07, 2009 A