Kubota M5640SU Workshop Manual page 51

M5640SU, M5640DT-SU, WSM
Replacing Fuse
1. The tractor electrical system is protected from potential damage
by fuses.
A blown fuse indicates that there is an overload or short
somewhere in the electrical system.
2. If any of the fuses should blow, replace with a new one of the
same capacity.
IMPORTANT
• Before replacing a blown fuse, determine why the fuse blew
and make any necessary repairs. Failure to follow this
procedure may result in serious damage to the tractor
electrical system. Refer to troubleshooting section of this
manual for specific information dealing with electrical
problems.
Protected Circuit
Fuse I.D. Capacity (A)
a 5
b 5
c 5
d 15
e 5
f 15
g 15
h 5
i 50
j 30
k 40
Replacing Light Bulb
1. Head lights :
Take the bulb out of the light body and replace with a new one.
2. Other lights :
Detach the lens and replace the bulb.
Light
Head light
Hazard lights
Turn signal
Tail light
G-35
GENERAL
Protected circuit
Alternator, Engine, Glow Plug
Meter Panel, OPC
Turn Signal
Work Light
Meter (Back Up)
Head Light, Tail Lamp
Flasher (Hazard)
Starter Relay
Charge, Glow Plug
Fuel Cut Solenoid
Key Switch, Head Light, Hazard
9Y1210365GEG0044US0
Capacity
12 V, 55 / 60 W (H4)
12 V, 23 W
12 V, 21 W
12 V, 21 / 5 W
9Y1210365GEG0045US0
KiSC issued 07, 2009 A