Checking And Adjustment; Traveling Clutch - Kubota M5640SU Workshop Manual

M5640SU, M5640DT-SU, WSM

4. CHECKING AND ADJUSTMENT

[1] TRAVELING CLUTCH

Clutch Pedal Stroke
1. Measure the clutch pedal (1) total stroke.
2. If the measurement is not within the factory specifications,
adjust it.
3. After adjustment, tighten the lock nut (3) firmly.
4. Check the pedal total stroke.
Total stroke Factory spec.
(1) Clutch Pedal
(2) Adjusting Bolt
Clutch Peal Free Travel
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel "L" at
top of pedal.
3. If adjustment is needed, loosen the lock nut (1), and turn the
turnbuckle (2) to adjust the clutch rod (3) length.
4. Retighten the lock nut (1).
Clutch pedal free travel
Factory spec.
"L" on the pedal
(1) Lock Nut
(2) Turnbuckle
2-S5
CLUTCH
165 to 170 mm
6.50 to 6.69 in.
(3) Lock Nut
9Y1210365CLS0004US0
35 to 45 mm
1.4 to 1.7 in.
(3) Clutch Rod
9Y1210365CLS0005US0
KiSC issued 07, 2009 A