Table of Contents
Advertisement
Technical description
6
Technical description
6.1
Gear unit configuration
The devices of the AG1000-PMxxxx series are planetary gear units. They can be used in any installation
position. The gears are lubricated lifetime and have an unbalance can Pinion. Furthermore, they are firmly
connected to the output shaft. Input and output are coaxial. The shafts rotate in the same direction. The
planetary gears are characterized by high efficiency. Also, the gearboxes of the series AG1000 high torque
transmission with small installation space.
6.2
Overview of the gear components
C
6.3
General technical data
The maximum permissible speeds and torques can be found in our catalog or on our website at
http://www.beckhoff.de.
6.4
Transport, assembly and disassembly
Recommendations for trouble-free operation and long service life
• Ensure adequate convection of the gear unit.
• Ensure adequate heat dissipation from the gear unit via the output flange.
• The gear unit may heat up due to the motor and other external heat sources. Acquaint yourself
with the motor temperature and external influences that may occur during operation.
• Note the protection class of the gear unit and the resulting constraints.
Preparing the installation
The drive and output sides are treated with a corrosion inhibitor to protect from corrosion. Ensure that the
installation instructions are enclosed with the gear unit and remove the corrosion inhibitor, once you have
read up on handling hazardous substances.
16
Gear components
A
Gear housing
B
Output shaft
A
C
Adapter plate
D
B
Version: 1.4
AG1000
Advertisement
Table of Contents
