Honda Shadow TA200 2001 Manual page 276

ia
UGHTSMETER/SVVITOiES
SYSTEM LOCATION 18-0 NEUTRAL SWITCH 18-8
SERVICE INFORMATION 18-1 TURN SIGNAL RELAY 18-8
TROUBLESHOOTING
18-2
HANDLEBAR SWITCHES
18-9
BULB REPLACEMENT 18-3 CLUTCH SWITCH 18-10
HEADLIGHT 18-5 BRAKE LIGHT SWITCH 18-11
SPEEDOMETER 18-6 DIODE 18-11
IGNITION SWITCH 18-7 HORN 18-12
SERVICEtEORMAllON
GENERAL
A halogen headlight bulb becomes very hot while the headlight is ON, and remain hot for a while after it is turned OFF. Be
sure to let it cool down before servicing.
Note the following when replacing the halogen headlight bulb.
- Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot
spots on the bulb and cause is to fail.
- I f you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
- Be sure to install the dust cover after replacing the bulb.
Check the battery condition before performing any inspection that requires proper battery voltage.
A continuity test can be made with the switches installed on the motorcycle.
The following color codes are used throughout this section.
Bu
=
Blue G
=
Green Lg
=
Light Green R
=
Red
Bl
=
Black
Gr
=
Gray O
=
Orange W
=
White
Br
=
Brown Lb
=
Light Blue P
=
Pink Y
=
Yellow
SPECIFICATIONS
ITEM
SPECIFICATIONS
Bulbs Headlight (Hight/low beam) 12V-30/30W
Tail/brake l i ght 12V-5/18W
Front turn signal light 12V-15Wx2
Rear turn signal light 12V-15Wx2
License l i ght 12V-5W
Instrument l i ght 12V-1.7W
Turn signal i n dicator
12V-1.7W
High beam i n dicator
12V-1.7W
Neutral indicator 12V-1.7W
Fuse Main fuse
15 A
18-1