Honda Shadow TA200 2001 Manual page 142

Clutch center holder
Lock nut wrench, 20 x 24 mm
Remove the lifter plate bolts.
07GMB - KT70101
07716-0020100
CLUTCH/GEARSHIFT LINKAGE
TORQUE: 83 N-m (8.5 kgf.m, 61 lbf.ft)
TOOL:
Apply oil to the new clutch center lock nut threads and I n stall
it.
Hold the pressure plate with the clutch center holder and
temporarily tighten the l i fter plate bolts.
Tighten the clutch center l o ck nut to the specified torque.
Stake the l o ck nut into the mainshaft groove.
CAUTION:
Be careful not to damage the mainshaft threads.
Install the clutch springs and clutch lifter plate.
Install and temporarily tighten the l i fter plate bolts i n a
crisscross paturn in 2 or 3 steps.
Tighten the lifter plate bolts to specified torque.
TORQUE: 12 N-m (1.2 kgf,m, 9 lbf-11)
Install the bearing into the clutch lifter plate.
9-11