Honda Shadow TA200 2001 Manual page 191

FRONT WHEEL/SUSPENSION/STEERING
INSTALLATION
Install the fork tube i n to the steering stem and top bridge.
Align the top end of the fork tube with the upper surface of
the top bridge as shown.
Tighten the bottom bridge pinch bolts.
TORQUE: 26 N-m (2.7 kgf.m, 20 lbf.fl)
Tighten the front turn signal pinch bolt securely.
Tighten the top bridge pinch bolts to the specified torque.
TORQUE: 23 N-m (2.3 kgf.m, 17 lbf-11)
nghten the fork cap bolt to the specified torque if it was re-
moved.
TORQUE: 23 N-m (2.3 kgf.m, 17 lbf.fl)
Install the following:
- Front fender (page 2-3)
- Front brake caliper (page 14-8)
-Front wheel (page 12-14)
12-22
BOTIOM BRIDGE PINCH BOLT TURN SIGNAL BOLT
• J ..,,.._ ••• , . )
:ir.w'!