Honda Shadow TA200 2001 Manual page 78

Turn the needle holder counterclockwise while pressing i t i n
and remove the holder flanges from the piston grooves.
Remove the needle holder, spring and jet needle from the
vacuum piston.
HOLDER
FUEL SYSTEM
Check the following:
- jet needle for stepped wear
- vacuum piston for wear or damage
- diaphragm for pin holes, deterioration or damage
NOTE:
Air can l e ak out of the vacuum chamber i f the diaphragm is
damaged i n any way, even i f only a pin hole.
.4,' .,:'.:,"
DIAPHRAGMNAGUUM PISTON
/
"
x ,/
JET NEEDLE
HOLDER
AIR CUT-OFF VALVE
Remove the two screws and clamp while holding the valve
cover.
Remove the valve cover, spring and diaphragm.
NOTE:
The air cut-off cover i s under spring pressure.
Remove the spring and air cut-off valve/diaphragm.
Check the following:
- diaphragm for pin holes, deterioration or damage
- spring for deterioralion
- needle of diaphragm for wear
- air passages for clogging
GABLE STAY
DIAPHRAGM
GOVER
SPRING
<,
GOVER
5-9