Honda Shadow TA200 2001 Manual page 98

ENGINE REMOVAL/INSTALLATION
Loosely install the upper engine hanger bracket bolts/nuts.
Connect the wire harness to the clamp.
Tighten the all bolts and nuts to the specified torque.
TORQUE:
1. Rear upper engine hanger bracket bolt/nut:
76 N-m (7.7 kgf-m, 56 lbf-ft)
2. Rear lower engine hanger bracket boll/nut:
76 N-m (7.7 kgf,m, 56 lbf,ft)
3. Engine hanger bracket bolts/nuts:
26 N-m (2.6 kgf-m, 19 lbf-ft)
4. Front engine hanger bracket bolt/nut:
76 N-m (7.7 kgf.m, 56 lbf-11)
5. Upper engine hanger bracket bolts/nuts:
26 N-m (2.6 kgf-m, 19 lbf-11)
UPPER ENGINE
I
HANGER BRACKET
: j!Jl.'i . "" :-' ··· ""··
CLAMP
··-
..
· · ·-- ---
5
2 4
Install the cap.
6-8