Honda Shadow TA200 2001 Manual page 201

13. REARVVHE
SERVICE INFORMATION
TROUBLESHOOTING
REAR WHEEL
SERVICElfORI\IIA1100
GENERAL
13-1
13-2
13-3
SHOCK ABSORBER
SWING ARM
13-9
13-11
A contaminated brake disc or pad reduces stopping power, Discard contaminated pads and clean contaminated disc
with a high quality brake degreasing agent.
Wheel balance directly affects the stabillty, handling and overall safety of the motorcycle. Carefully check balance
before reinstalling the wheel.
CAUTION:
To
avoid damaging the rim when using the tire lever, always use rim protectors.
When servicing the rear wheel, swingarm or shock absorber, support the motorcycle securely with a using a hoist or
equivalent.
Use only genuine Honda replacement bolts and nuts for all suspension pivot and mounting points.
SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Minimum tire tread depth
--
To the i n dicator
Cold tire pressure Driver only 200 kPa (2.0 kgf/cm', 29 psi)
--
Driver and passenger 200 kPa (2.0 kgf/cm', 29 psi)
--
Axle runout
--
0.20 (0.008)
Wheel rim runout
Radial
--
2.0 (0.08)
Axial
--
2.0 (0.08)
Drive chain Size/link 520/116
--
Slack
20 - 30 (0.8 -1.2)
--
TORQUE VALUES
m
Rear axle nut
Driven sprocket nut
Rear brake disc bolt
Shock absorber upper mounting bolt
Shock absorber lower mounting nut
Swingarm pivot nut
Drive chain slider screw
Right side only
88 N·m (9.0 kgf·m, 65 lbf·ft)
64 N·m (6.5 kgf·m, 47 lbMt)
42 N·m (4.3 kgf·m, 31 lbMt)
12 N·m (1.2 kgf·m, 9 l b f-ft)
34 N·m (3.5 kgf·m, 25 lbf·ft)
88 N·m (9.0 kgf·m, 65 lbf·ft)
9 N·m (0.9 kgf·m, 65 l b f-ft)
U-nut
U-nut
Apply l o cking agent to the threads
U-nut
13-1