Honda Shadow TA200 2001 Manual page 242

HYDRAULIC BRAKE
DISASSEMBLY
NOTE:
Do not remove the caliper and bracket pins unless replace-
ment.
Remove the caliper bracket from the caliper body.
Remove the pad spring and bracket pin boots lrom the cali-
per body.
Place a shop towel aver the piston.
Position the caliper body with the piston down and apply small
squirts at air pressure to the fluid inlet to remove the piston.
Do not use high pressure air or bring the nozzle too
close
to
the inlet.
Push the dust seal and piston seal in and l i ft them out.
CAUTION:
Be careful not to damage the piston sliding surface.
Clean the seal grooves, caliper piston and caliper piston slid-
ing surfaces with
clean brake fluid.
14-26
CALIPER
BOOTS
r--------...
\
.
PISTON SEAL
DUST SEAL