Honda Shadow TA200 2001 Manual page 220

Table of Contents

Advertisement

HYDRAULIC BRAKE
REAR·
FRONT:
DIAPHRAGM
____ J-:' " °...:::=-
SCREWS
...___ RESERVOIR
SET PLATE - ..
---s; ;:::::::::;;;;;;,i
COVER
Do not allow foreign material to enter the system when
filling the reservoir.
A void spilling brake fluid on painted, plastic or rubber parts.
Place
a
rag or shop towel over these parts whenever the
system is serviced.
Use only DOT 3 or 4 brake fluid from
a
sealed container.
Do not mix different types of fluid. They are not compat-
ible
BRAKER.ll)REPLACB.ENT/Afl
BL.EEIH;
A contaminated brake disc or pad reduces stopping power.
Discard contaminated pads and clean contaminated disc with
a high quality brake degreasing agent.
For the rear brake, remove the right side cover (page 2-2).
BRAKE FLUID DRAINING
For the front brake, turn the handlebar to the left until the
reservoir i s l e vel. Remove the screws, reservoir cover, set plate
and diaphragm.
CAUTION:
Remove the screws, reservoir cover, set plate and diaphragm.
Connect the bleed tube to the caliper bleeder.
-,
Loosen the bleed valve and pump the brake lever or pedal
until no more fluid flows out of the caliper bleeder.
14-4

Advertisement

Table of Contents
loading

Table of Contents