Honda Shadow TA200 2001 Manual page 155

ALTERNATOR/STARTER CLUTCH
Apply oil to the starter i d le gear shaft.
Install the starter idle gear and shaft.
TORQUE: 74 N-m (7.5 kgf.m, 54 lbf.ft)
Install the flywheel by align the woodruff key on the crank-
shafl wilh flywheel keyway.
Apply oil to the flyfheel threads and seating surface.
Install the washer and bolt.
Hold the flywheel with the flywheel holder, tighten the bolt to
the specified torque.
07725 - 0040000
TOOL:
Flywheel holder
STAUl
REMOVAL
Remove the left crankcase cover (page 10-2).
Remove lhe socket bolls.
Remove the three socket bolts, stater wire guide, stator and
ignition pulse generator from the left crankcase.
INSTALLATION
Install the stator, code guide and tighten the bolts.
Apply a locking agenl lo lhe socket bolt threads.
Install the i g nition pulse generator and tighten the socket bolts
to the specified torque.
TORQUE: 5 N-m (0.5 kgf-rn, 3.6 lbf-ft)
10-7