Honda Shadow TA200 2001 Manual page 177

FRONT WHEEL/SUSPENSION/STEERING
Tighten the forward screw first, then the rear screw.
Install the clutch lever assembly aligning the end of the l e ver
holder with the punch mark on the handlebar.
Install the clutch lever holder with the "UP" mark facing up.
Tighten the upper bolt first, then the l o wer bolt.
Connect the clutch switch wires.
LEFT
HANDLEBAR SWITCH
\
"UP" MARK
Install the both handlebar weight on to the i n ner weight, align-
ing the bosses and grooves each other.
Install the weight screw and tighten it while holding the weight.
12-8