Page 1: Table Of Contents
Contents Vehicle Safety P. 2 Operation Guide P. 18 Maintenance P. 224 Troubleshooting P. 290 Information P. 319 Specifications P. 351 31MKS810 2021 Africa Twin (CRF1100A/D/A4/D4) MOM 17534 (2006)
Page 2 Welcome Congratulations on your purchase of a new When service is required, remember that Honda vehicle. Your selection of a Honda your Honda dealer knows your vehicle best. makes you part of a worldwide family of If you have the required mechanical “know- satisfied customers who appreciate Honda's how”...
Page 3 A Few Words About Safety DANGER Your safety, and the safety of others, is very important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...
Page 4: Vehicle Safety
Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Safety Labels............P. 8 Safety Precautions..........P. 10 Riding Precautions ..........P. 11 Accessories & Modifications......P. 15 Off-Road Safety ..........
Page 5: Safety Guidelines
Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual.
Page 6 Safety Guidelines We recommend that all riders take a certified Ride Defensively course approved by the Motorcycle Safety Always pay attention to other vehicles around Foundation (MSF) or a state approved training you, and do not assume that other drivers see course.
Page 7 If you decide to continue riding, first turn the either. ignition switch to the OFF position, and evaluate Keep Your Honda in Safe Condition the condition of your vehicle. Inspect for fluid leaks, check the tightness of critical nuts and...
Page 8 Safety Guidelines Lithium-Ion (Li-Ion) Battery Emergency Shut-down Procedure for Vehicles Equipped with Dual Clutch If you smell an unusual odor coming from the Transmission lithium-ion (li-ion) battery, park your vehicle in a safe place outside and away from flammable CRF1100D/D4 objects, then turn the ignition switch to the OFF Unlike standard motorcycles, or its manual position.
Page 9 Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colorless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.
Page 10: Safety Labels
Safety Labels Safety Labels serious injury. Read these labels carefully and don't remove them. Safety and information labels on your vehicle If a label comes off or becomes hard to read, provide important safety information and may contact your dealer for a replacement. warn you of potential hazards that could cause CRF1100A4/D4...
Page 11 Safety Labels CRF1100A/D CRF1100A4/D4...
Page 12: Safety Precautions
Safety Precautions Safety Precautions Must fit comfortably but securely, with the ● chin strap fastened. Ride cautiously and keep your hands on the Face shield with unobstructed field of vision ● ● handlebar and feet on the footpegs. or other approved eye protection Keep passenger's hands onto the grab rail ●...
Page 13: Riding Precautions
Riding Precautions Riding Precautions Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Break-in Period Jacket and Pants During the first 300 miles (500 km) of running, follow these guidelines to ensure your vehicle's Protective, highly visible, long-sleeved jacket future reliability and performance.
Page 14 Riding Precautions ABS does not function at speeds below 6 Exercise caution on low traction surfaces. ● ● mph (10 km/h). The tires slip more easily on such The brake lever and pedal may recoil slightly surfaces and braking distances are ●...
Page 15 Riding Precautions Turn the handlebar fully to the left. Parking Turning the handlebar to the right Park on a firm, level surface. ● reduces stability and may cause the If you must park on a slight incline or loose ● vehicle to fall.
Page 16 Torque Control may not compensate for rough Honda selectable torque control road conditions or rapid throttle operation. When the Honda selectable torque control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.
Page 17: Accessories & Modifications
We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed or approved for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.
Page 18: Off-Road Safety
Off-Road Safety Off-Road Safety Never ride beyond your ability and ● experience or faster than conditions warrant. Learn to ride in an uncongested off-road area If you are not familiar with the terrain, ride ● free of obstacles before venturing onto cautiously.
Page 19: Loading
Loading Loading Also follow these guidelines when you ride off- road on rough terrain: Carrying extra weight affects your vehicle's Do not carry a passenger. ● ● handling, braking and stability. Keep cargo small and light weight. ● Always ride at a safe speed for the load you Make sure it cannot easily be caught on brush or other objects, and that it does not are carrying.
Page 20: Operation Guide
Parts Location Fuse puller, Hex wrench, Standard/Phillips screwdriver, Screwdriver handle (P.222) Document bag (P.221) Throttle grip (P.276) Battery box cover (P.249) Rear suspension compression damping adjuster CRF1100A/D (P.286) Front suspension compression damping adjusters CRF1100A/D (P.280)
Page 21 Rear brake fluid reservoir (P.264) Front brake fluid reservoir (P.264) Main fuse & ABS main fuse (P.316) FI fuse & Main 2 fuse CRF1100A/A4 (P.317) FI fuse & Main 2 & DCT main fuse CRF1100D/D4 (P.318) Rear brake pedal Coolant reserve tank (P.262) Spark arresters (P.258)
Page 22 Parts Location (Continued) Clutch lever CRF1100A/A4 (P.273) Parking brake lever CRF1100D/D4 (P.266) Windscreen lock lever CRF1100A4/D4 (P.288) USB socket (P.218) Accessory socket CRF1100A4/D4 (P.217) Rear suspension spring preload adjuster CRF1100A/D (P.282) Rear suspension rebound damping adjuster CRF1100A/D (P.285) Side stand (P.268) Skid plate (P.255)
Page 23 Front suspension spring preload/ rebound damping adjusters CRF1100A/D (P.278) (P.279) Fuel fill cap (P.216) Front brake lever (P.277) Front seat (P.251) Fuse box & ABS FSR fuse (P.315) Rear seat (P.253) Battery (P.248) Tool kit/Tool box (P.222) (P.257) Engine oil fill cap (P.260) Shift lever CRF1100A/A4...
Page 24 Instruments Odometer [TOTAL] Total distance ridden. When “ ” is displayed, have your Speedometer dealer check for problems. AT indicator CRF1100D/D4 Comes on when the AT MODE. (P.206) Display Check When the ignition switch is turned to the ON position, all the mode and digital segments will show.
Page 25 Gear position indicator CRF1100A/A4 The gear position is shown in the gear position indicator. “-” appears when the transmission is not shifted properly. CRF1100D/D4 The gear position is shown in the gear position indicator when the MT MODE is selected. The indicator may flash if: The front wheel leaves the ground.
Page 26 Instruments (Continued) Multi-information display When the ignition switch is turned ON, the Notice message appears on the screen for a Your vehicle is equipped with a multi- few seconds. information display that presents various Read the Notice message, and then press the functions and settings.
Page 27 Home Screen Riding Information From this screen, you can go to various You can go back to the riding information. functions and setup options. Riding information has 3 displays, Gold To return to the Home screen: image display, Silver image display and (P.36) Bronze image display.
Page 28 Instruments (Continued) Riding Information Air temperature gauge Gold image display (P.63) Clock (12-hour or 24-hour display) To set the clock: (P.86) Riding mode display (P.137) Side stand indicator (P.63) Sub-information indicator (P.39) Cruise Control Set Speed The speed set for cruise control is displayed.
Page 29 Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) Fuel gauge Remaining fuel when only E (1st) segment starts flashing: Approximately 0.95 US gal (3.6 L) CRF1100A/D Approximately 1.03 US gal (3.9 L) CRF1100A4/D4...
Page 30 Instruments (Continued) Torque Control level [T] indicator (P.129) When the indicator flashes, have your dealer check for problems. [EB] [Engine Brake] level indicator (P.137) When the indicator flashes, have your dealer check for problems. [P] [Power] level indicator (P.137) When the indicator flashes, have your dealer check for problems.
Page 31 Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P.128) If the handle grip heater status icon flashes: (P.298) Gear position indicator CRF1100A/A4 The gear position is shown in the gear position indicator. “-”...
Page 32 Instruments (Continued) Silver image display Clock (12-hour or 24-hour display) To set the clock: (P.86) Side stand indicator (P.63) Riding mode display (P.137) NOTICE You should refuel when the reading approaches the E (1st) segment. Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
Page 33 Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P.128) If the handle grip heater status icon flashes: (P.298) Air temperature gauge (P.63) Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life.
Page 34 Instruments (Continued) Torque Control level [T] indicator (P.129) When the indicator flashes, have your dealer check for problems. [EB] [Engine Brake] level indicator (P.137) When the indicator flashes, have your dealer check for problems. [P] [Power] level indicator (P.137) When the indicator flashes, have your dealer check for problems.
Page 35 Bronze image display Clock (12-hour or 24-hour display) To set the clock: (P.86) Riding mode display (P.137) Side stand indicator (P.63) Cruise Control Set Speed The speed set for cruise control is displayed. Cruise Control: (P.210) Continued...
Page 36 Instruments (Continued) Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P.128) If the handle grip heater status icon flashes: (P.298) [P] [Power] level indicator (P.137) When the indicator flashes, have your dealer check for problems. Torque Control level [T] indicator (P.129) When the indicator flashes, have your dealer check for problems.
Page 37 Air temperature gauge (P.63) Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) Fuel gauge Remaining fuel when only E (1st) segment starts flashing: Approximately 0.95 US gal (3.6 L) CRF1100A/D Approximately 1.03 US gal (3.9 L)
Page 38 Instruments (Continued) To Return to the Home Screen Basic Operations Pull backward and hold the page switch You can operate and set the various on the left handlebar or touch the clock area functions of your vehicle using the switches of the multi-information display with your on the left handlebar and function sel...
Page 39 To Select a Desired Setting Menu To Set Your Selection To operate with the left handlebar: To operate with the left handlebar: Press to select the available Press the switch on the left handlebar choices. to set your selection. To operate with the left handlebar: switch Push to select the available...
Page 40 Instruments (Continued) To Exit the Setting Menu To operate with the touch screen: To return to the riding information: Touch the to be selected on the touch Pull backward the page switch on the screen. left handlebar. Also, the setting mode ends when your To return to the Home screen: vehicle speed reaches approximately 4 mph Pull backward and hold the...
Page 41 Page 1: Page 1 shows the following items: Tripmeter A [TRIP A] and three items related to Tripmeter A [TRIP A] and Tripmeter B [TRIP (P.82) • Tripmeter A average fuel mileage [AVG. CONS.] display (P.44) • Tripmeter A average speed [AVG. SPD.] display (P.49) •...
Page 42 Instruments (Continued) Page 2: Page 2 shows the following items: Tripmeter B [TRIP B] and three items related to Tripmeter B [TRIP B]. (P.82) • Tripmeter B average fuel mileage [AVG. CONS.] display (P.48) • Tripmeter B average speed [AVG. SPD.] display (P.49) •...
Page 43 Page 3: Page 3 shows four items selected from the following items. (P.82) • Current fuel mileage [INST. CONS.] display (P.52) • Available driving distance [RANGE] display (P.53) • Battery voltage [VOLTAGE] display (P.54) • Date [DATE] display (P.54) • Average fuel mileage [AVG. CONS.] display (P.55) •...
Page 44 Page 4: Page 4 shows the setting values of the following items. • ABS function on the rear wheel [ABS RR] display (P.58) • Honda Selectable Torque Control level [HSTC] display (P.59) • Wheelie Control level [W] display (P.60) •...
Page 45 To Switch the Page of Display Tripmeter A [TRIP A] Distance ridden since the tripmeter A was Select the gold image display. (P.77) Push the of the sel left/ reset. right switch until the desired page is displayed. You can also perform the above settings by using the touch screen.
Page 46 Instruments (Continued) Tripmeter A Average Fuel Mileage [AVG. CONS.] Displays the average fuel mileage since the tripmeter A was reset. The average fuel mileage will be calculated based on the value displayed on the selected tripmeter A. Display range: 0.0 to 299.9 mpg (km/L, L/100 km or mile/L) Initial display: “---.-”...
Page 47 Tripmeter A Average Speed [AVG. SPD.] Displays the average speed since the tripmeter A was reset. The average speed will be calculated based on the value displayed on the selected tripmeter A. Initial display: “0” is displayed. ● Display range: 0 to 186 mph or 0 to 299 km/h To reset the tripmeter A average speed [AVG.
Page 48 Instruments (Continued) Tripmeter A Fuel Consumption Tripmeter A Elapsed [ELAPSED] [CONS.] Displays the tripmeter A elapsed since the Displays the tripmeter A fuel consumption tripmeter A was reset. since the tripmeter A was reset. Display range: 00:00 to 99:59 (hours:minutes) Display range: 0.0 to 300.0 gal (L) The display locks at “99:59”...
Page 49 When “00:00” flashes, have your dealer check Tripmeter B [TRIP B] for problems. Distance ridden since the tripmeter B was reset. To reset the tripmeter A elapsed [ELAPSED]: (P.65) Continued...
Page 50 Instruments (Continued) When “---.-” flashes, have your dealer check Tripmeter B Average Fuel Mileage for problems. [AVG. CONS.] Displays the average fuel mileage since the To reset the tripmeter B [TRIP B]: tripmeter B was reset. The average fuel mileage will be calculated (P.66) based on the value displayed on the selected tripmeter B.
Page 51 Tripmeter B Average Speed [AVG. SPD.] Displays the average speed since the tripmeter B was reset. The average speed will be calculated based on the value displayed on the selected tripmeter B. Initial display: “0” is displayed. ● Display range: 0 to 186 mph or 0 to 299 km/h When “---.-”...
Page 52 Instruments (Continued) Tripmeter B Fuel Consumption [CONS.] Displays the tripmeter B fuel consumption since the tripmeter B was reset. Display range: 0.0 to 300.0 gal (L) Above 300.0 gal (L): “300.0” is displayed. ● To reset the tripmeter B average speed [AVG.
Page 53 When “00:00” flashes, have your dealer check Tripmeter B Elapsed [ELAPSED] for problems. Displays the tripmeter B elapsed since the tripmeter B was reset. To reset the tripmeter B elapsed Display range: 00:00 to 99:59 (hours:minutes) [ELAPSED]: The display locks at “99:59” when the (P.66) ●...
Page 54 Instruments (Continued) When “---.-” flashes, have your dealer check Current Fuel Mileage [INST. CONS.] for problems. Displays the current instant fuel mileage Display range: 0.0 to 299.9 mpg (km/L, L/100 km or mile/L) When your speed is less than 1 mph (3 ●...
Page 55 Available Driving Distance [RANGE] Displays the estimated distance you can travel on the remaining fuel. Display range: 999 to 0 mile (999 to 0 km) Above 999 mile (km): “999” is displayed. ● Initial display: “0” is displayed. ● When the available driving distance is ●...
Page 56 Instruments (Continued) Battery Voltage [VOLTAGE] Date [DATE] Displays the current battery voltage. Displays today's date. Display range: 7.5 to 18.5 V To set the current date: (P.86) When “---.-” flashes, have your dealer check for problems.
Page 57 Average Fuel Mileage [AVG. CONS.] Displays the average fuel mileage since the average fuel mileage was reset. Display range: 0.0 to 299.9 mpg (km/L, L/100 km or mile/L) Initial display: “---.-” is displayed. ● More than 299.9 mpg (km/L, L/100 km or ●...
Page 58 Instruments (Continued) Fuel Consumption [CONS.] Elapsed Time [ELAPSED] Displays the fuel consumption. Displays operating time since the engine was started. Display range: 0.0 to 300.0 gal or 0.0 to 300.0 Display range: 00:00 to 99:59 (hours:minutes) The display locks at “99:59” when the Above 300.0 gal (L): “300.0”...
Page 59 To set the subtraction trip: Subtraction Trip [-TRIP] (P.75) Distance travelled is subtracted from a preset Default: 000 figure, since the subtraction trip was set up. Display range: 999.0 to -1,000.0 mile or 1,607.3 to -1,609.0 km The display locks at “-1000.0” mile (“-1609.0” km) when the read-out exceeds -1000.0 mile (-1609.0 km).
Page 60 Instruments (Continued) Available settings: [ACTIVE]/[CANCEL] ABS Function on the Rear Wheel Default: [ACTIVE] [ABS RR] Displays the selected status of the ABS To select the ABS function on the rear function on the rear wheel [ABS RR]. wheel [ABS RR]: (P.118)
Page 61 Setting range: Level 1 to 7 or 0 (Off) Honda Selectable Torque Control Level [HSTC] To select the Honda Selectable Torque Display the selected value of the Honda Control level [HSTC]: Selectable Torque Control level [HSTC]. (P.129) Continued...
Page 62 Instruments (Continued) Setting range: Level 1 to 3 or 0 (Off) Wheelie Control Level [W] Display the selected value of the wheelie To select the wheelie control level [W]: control level [W]. (P.133)
Page 63 Rear Suspension Preload Mode Status icon Riding condition [PRELOAD] Rider only CRF1100A4/D4 (Minimum preload) Displays the selected status of the rear suspension preload mode [PRELOAD]. Rider and luggage Rider and passenger Rider, passenger and luggage (Maximum preload) Default: Rider only To select the rear suspension preload mode [PRELOAD]: (P.283)
Page 64 Instruments (Continued) Available settings: [ACTIVE]/[CANCEL] G Switch [G] Default: CRF1100D/D4 • [TOUR MODE]: [CANCEL] Displays the selected status of the G switch [G]. • [URBAN MODE]: [CANCEL] • [GRAVEL MODE]: [CANCEL] • [OFF ROAD MODE]: [ACTIVE] • [USER 1 MODE]: [CANCEL] •...
Page 65 Side Stand Indicator Air temperature gauge The side stand indicator comes on when the Displays the ambient temperature. side stand is put down. It goes off when the side stand is raised. Air temperature gauge Side stand indicator Continued...
Page 66 Instruments (Continued) Display range: 14 ºF (-10 ºC) to 122 ºF (50 ºC) Cruise Control Set Speed Below 13ºF (-11ºC): “---” is displayed The speed set for cruise control is displayed. ● Above 122ºF (50ºC): 122ºF (50ºC) flashes ● Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
Page 67 To Reset the Tripmeter A [TRIP A], Tripmeter A Average Fuel Mileage [AVG. CONS.], Tripmeter A Average Speed [AVG. SPD.], Tripmeter A Fuel Consumption [CONS.] and Tripmeter A Elapsed [ELAPSED] To reset the tripmeter A [TRIP A], tripmeter A average fuel mileage [AVG. CONS.], tripmeter A average speed [AVG.
Page 68 Instruments (Continued) To Reset the Tripmeter B [TRIP B], Tripmeter B Average Fuel Mileage [AVG. CONS.], Tripmeter B Average Speed [AVG. SPD.], Tripmeter B Fuel Consumption [CONS.] and Tripmeter B Elapsed [ELAPSED] To reset the tripmeter B [TRIP B], tripmeter B average fuel mileage [AVG.
Page 69 To Reset the Average Fuel Mileage [AVG. CONS.] To reset the average fuel mileage [AVG. CONS.], press and hold the switch while page 3 is displayed or touch and hold the page 3 area. Continued...
Page 70 Instruments (Continued) Setting mode Riding information To Shift to the Menu of the Multi- Information Display Home screen Pull backward and hold the Riding Information page switch or touch the clock area of the multi-information Phone (P.175) display. Select [Riding Information], and then Media (P.152) press the...
Page 71 Press the switch. Press the back switch or touch the of the multi-information display. Press the sel up switch. Press the sel down switch. Function User Modes Settings (P.73) -Trip Auto Cancel Turn Signal Continued...
Page 72 Instruments (Continued) Display Settings Display Mode (P.77) Brightness Background Favorite Information Favorite Switch...
Page 73 General Settings Date and Time (P.86) Units Volume Language Restore Default Settings Continued...
Page 74 Instruments (Continued) Service Settings Maintenance (P.103) Initialize Bluetooth Service mode (P.152) CRF1100A4/D4 Connected Equipment Services (P.189) System Information Regulatory (P.103)
Page 75 User Modes Function You can change the [Power], [Engine Brake], Following items can be changed sequentially. [Overall], [Front], [Rear], [ABS], [Preload] • User Modes (this page) values in [USER 1 MODE] and [USER 2 • -Trip (P.75) MODE]. • Auto Cancel Turn Signal (P.76) Continued...
Page 76 Instruments (Continued) Select [User Modes], and then press the switch. Select [User 1] or [User 2] using the up or sel down switch, and then press switch. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 77 -Trip Press and hold the sel up switch or down switch to advance the You can also adjust value of the subtraction figure fast. trip [-TRIP]. Return to the riding information, previous Select [-Trip], and then press the screen or Home screen. switch.
Page 78 Instruments (Continued) Auto Cancel Turn Signal Select [Auto Cancel Turn Signal], and then press the switch to [ON] (enable) or You can enable/disable turn signal automatic [OFF] (disable) the function. cancellation. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 79 Display Mode Display You can select the riding information image. Following items can be changed sequentially. • Display Mode (this page) • Brightness (P.79) • Background (P.80) • Favorite Information (P.82) • Favorite Switch (P.84) Continued...
Page 80 Instruments (Continued) Select [Display Mode], and then press the Available settings: Gold image/Silver switch. image/Bronze image Press the sel up switch or sel down Default: switch to select a setting menu. • [TOUR MODE]: Gold image Push the of the sel left/ •...
Page 81 Brightness Select [Brightness], and then press the switch. You can select the backlight brightness. Select [Auto], and then press the switch to [ON] (auto) or [OFF] (manual) the The display can become dark when the function. display is very hot. If it does not restore the original brightness, contact your dealer.
Page 82 Instruments (Continued) If you select to [OFF] (manual) push the Background of the sel left/right switch to You can select the background. select your preferred level. Push and hold the of the Automatic Background Control: sel left/right switch to advance the (P.324) figure fast.
Page 83 Select [Background], and then press the If you select to [OFF] (manual), press the switch. sel up switch or sel down switch to Select [Auto], and then press the select the [White] or [Black]. switch to [ON] (auto) or [OFF] (manual) the function.
Page 84 Instruments (Continued) Favorite Information Page 3 ● You can select the following: • Current fuel mileage [INST. CONS.] Page 1 • Available driving distance [RANGE] ● • Tripmeter A average fuel mileage • Battery voltage [VOLTAGE] [AVG. CONS.] • Date [DATE] •...
Page 85 Select [Favorite Information], and then press Press to select the available switch. choices, and then press the switch. Push the of the sel left/ right switch until the desired page is displayed. Press to select the available choices, and then press the switch.
Page 86 Instruments (Continued) Default: Favorite Switch • Page 1 • Tripmeter A average fuel mileage [AVG. CONS.] • Tripmeter A average speed [AVG. SPD.] • Tripmeter A current fuel mileage [CONS.] • Page 2 • Tripmeter B average fuel mileage [AVG. CONS.] •...
Page 87 Select [Favorite Switch], and then press the Return to the riding information, previous switch. screen or Home screen. (P.38) Press the sel up switch or sel down You can also perform the above settings by switch to select your desired mode. using the touch screen.
Page 88 Instruments (Continued) Date and Time General The multi-information display receives signals Following items can be changed sequentially. from GPS satellites and updates the date and • Date and Time (this page) time automatically. • Units (P.89) You can also adjust the date and time •...
Page 89 To [ON] (auto) adjust time automatically When GPS cannot be located. Read the function: notice message, and then press the Select [Date and Time], and then press the switch. switch. Select [Adjust Time Automatically], and then press the switch to [ON] (auto) or [OFF] (manual) the function.
Page 90 Instruments (Continued) To adjust the clock manually: Press on the sel left/right switch to select a day, month, year, hour, Select [Date and Time], and then press the minute or time format section. switch. To advance the day, month, year, hour Select [Adjust Time Automatically], and then ●...
Page 91 Units You can change the following units. [Speed]: [mph] or [km/h] ● [Temperature]: [ºF] or [ºC] ● [Fuel Consumption]: [mpg] or [mile/L] ● If the [km/h] for speed is selected, the fuel mileage shown by [L/100 km] or [km/L]. Return to the riding information, previous screen or Home screen.
Page 92 Instruments (Continued) Select [Units], and then press the Available settings: switch. [Speed]: [mph]/[km/h] ● Press the sel up switch or sel down [Temperature]: [ºF]/[ºC] ● switch to select a setting menu. [Fuel Consumption]: [mpg]/[mil/L]/[L/100 ● Push the of the sel left/ km]/[km/L] right switch to select your desired unit.
Page 93 Volume To [Off] (disable), [Low] or [High] automatic Selects the volume setting to automatically volume function: increase volume from the headsets as the Select [Volume], and then press the switch. speed of the vehicle increases. Select [Auto Volume], and then press the switch.
Page 94 Instruments (Continued) To adjust the volume: Select [Volume], and then press the switch. Press the sel up switch or sel down switch to select a setting menu. Push the of the sel left/ right switch to select your preferred level. Push and hold the of the sel left/right switch to advance the...
Page 95 Return to the riding information, previous Language screen or Home screen. Changes the system language. (P.38) You can also perform the above settings by using the touch screen. VOLUME level range: Other than Microphone: Level 0 to 30 Microphone: Level 0 to 14 Default: Music: 7 ●...
Page 96 Instruments (Continued) Restore Default Settings The set values can be returned to default settings. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen. Select [Restore Default Settings], and then press the switch.
Page 97 Select the [No] (not restore) or [Yes] Select the [No] (not restore) or [Yes] (restore) using the sel up or sel down (restore) using the sel up or sel down switch. switch on the confirmation screen. When the [No] is selected When the [No] is selected Press the switch.
Page 98 Instruments (Continued) Return to the riding information, previous Page 1: screen or Home screen. Tripmeter A average fuel mileage (P.38) You can also perform the above settings by [AVG. CONS.] using the touch screen. Tripmeter A average speed [AVG. Default setting values: SPD.] -TRIP: 000 Tripmeter A current fuel mileage...
Page 99 Favorite switch: [HSTC] Service ● Auto Volume: [OFF] Following items can be changed sequentially. ● Periodic Maintenance: ● • Maintenance (P.98) • Distance: "-----" • DTC (P.100) • Date: "----/---" • Initialize (P.101) Oil Change: ● • Service mode CRF1100A4/D4 (P.102) •...
Page 100 Instruments (Continued) Maintenance Select [Maintenance], and then press the switch. You can check the next periodic inspection Press the sel up switch or sel down time and next engine oil change. switch to select a setting menu, and then You can change the setting of the next press the switch.
Page 101 To advance the distance, month or You can also perform the above settings by ● using the touch screen. year: Press the sel up switch, and then press the switch until the Setting range: desired value is displayed. Periodic Maintenance: To delay the distance, month or year: ●...
Page 102 Instruments (Continued) Select [DTC], and then press the switch. You can check for a current problem with the PGM-FI system. If your vehicle has problem, DTC index is displayed. Reduce speed and have your vehicle inspected by your dealer as soon as possible. Return to the riding information, previous screen or Home screen.
Page 103 Initialize Select [Initialize], and then press the switch. You can calibrate of the touch screen. Select [Touchscreen Calibration], and then press the switch. Continued...
Page 104 Instruments (Continued) Touch the center on each of the four crosse. Service Mode The screen flashes green when CRF1100A4/D4 calibration is complete. The cornering light can be turned on when If calibration fails, the screen flashes the vehicle is stopped for inspection. red.
Page 105 Select [Cornering Light Service Mode], and Equipment then press the switch. This menu cannot be selected. The cornering light lights up. The service mode will automatically stop System Information in 5 minutes. Shows various information of the multi- information display. [Software Version] ●...
Page 106 Instruments (Continued) Pop-up information In the following cases, pop-up information is displayed at the bottom of the multi-information display. Maintenance information: ● When the inspection time of your vehicle is approaching. Maintenance information Indication Explanation Remedy When the periodic Have your vehicle inspection time of inspected by your your vehicle is...
Page 107 BLANK PAGE...
Page 108 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. High coolant temperature indicator Comes on briefly when the ignition switch is turned to the ON position. If it comes on while riding: (P.292) Left turn signal...
Page 109 Torque Control indicator Comes on when the ignition switch is turned to the ON position. Goes off ● when your speed reaches approximately 3 mph (5 km/h) to indicate Torque Control is ready to work. Blinks when Torque Control is operating. ●...
Page 110 Indicators (Continued) Neutral indicator Parking brake indicator Comes on when the CRF1100D/D4 transmission is in Neutral. Lights as a reminder that you have not released the parking brake lever. Low fuel indicator Comes on briefly when the ignition switch is turned to the ON position. ●...
Page 111 ABS (Anti-lock Brake System) indicator Comes on briefly when the ignition switch is turned to the ON position. ● Goes off when your speed reaches approximately 6 mph (10 km/h). ● If it comes on while riding: (P.294) Rear ABS (Anti-lock Brake System) OFF Indicator Comes on briefly when the ignition switch is turned to the ON position.
Page 112 Indicators (Continued) Suspension indicator CRF1100A4/D4 Comes on when the suspension initialization is waiting. ● Stop your vehicle and wait for a few seconds until the indicator turns off. ● If indicator dose not turn off, contact your dealer. Low oil pressure indicator Comes on when the ignition switch is turned to the ON position.
Page 113 BLANK PAGE...
Page 114 Switches Left handlebar Right handlebar switch switch (P.114) (P.113) Turns electrical system on for starting/riding. Ignition switch Switches the electrical system on/off, locks the steering. Turns engine off. Key can be removed when in the LOCK OFF or LOCK position. Locks steering.
Page 115 Right handlebar switch Function sel switch Engine stop switch/ Press to display the pop-up information button START on the multi-information display. Should normally remain in (Run) position. In an emergency, switch to the (Stop) position to stop the engine. To start the engine. (P.200) AT/MT switch CRF1100D/D4...
Page 116 Switches (Continued) Left handlebar switch Favorite switch Favorite switch can be assigned to the HSTC switch, wheelie control switch, riding mode switch or G switch ( CRF1100D/D4 (P.84) Horn button Turn signal switch The turn signal will automatically stop Shift down switch (-) when you complete the turn.
Page 117 Function lever Push forward or pull backward to adjust the audio system volume. ● (P.150) Push forward or pull backward to adjust the grip heater level. ● (P.127) Voice control switch / Page switch Push forward to receive, reject or end a call. ●...
Page 118 Switches (Continued) switch Press to set your selection. (P.37) Sel up switch Press the sel up switch to select the available choices. (P.37) Sel left/right switch Press the sel left/right switch in the directions to select the available choices. (P.37) Goes back switch Goes back to the beginning of the current or previous song or to move rapidly within a track.
Page 119 Steering Lock Locking Turn the handlebar all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the LOCK position. A U-shaped wheel lock or similar device is Jiggle the handlebar if the lock is difficult also recommended.
Page 120 ABS function on the rear wheel The ABS function on the rear wheel can be To turn off the ABS function on the rear optionally turned off for off-road riding. wheel You can turn off the rear wheel ABS function Stop the vehicle and close the throttle completely.
Page 121 Press the switch. Read the notice message. Select [ABS RR]. Select [Yes], and then press the switch. Press on the sel left/right switch to select [CANCEL] (off). Press the back switch. The rear ABS OFF indicator is on, when the ABS function on the rear wheel [ABS RR] is turned [CANCEL] (off).
Page 122 ABS function on the rear wheel (Continued) To turn on the ABS function on both Press the switch. Select [ABS RR]. wheels Press on the sel left/right switch Stop the vehicle and close the throttle to select [ACTIVE] (on). completely. The rear ABS OFF indicator flashes Select the gold image display.
Page 123 Press the back switch. Available settings: [ACTIVE]/[CANCEL] You can also perform the above settings Default: [ACTIVE] by using the touch screen. When the gold image is selected: ABS function on ABS function on both wheels is rear wheel is [ACTIVE] (on). [CANCEL] (off).
Page 124 G switch G switch on or off CRF1100D/D4 The G switch can change the engine When using the favorite switch. ● characteristics of your vehicle to help Stop the vehicle and close the throttle completely. improve traction and machine control for off- Select [G Switch] of the favorite road riding by reducing the amount of clutch...
Page 125 When using the multi-information display: Press on the sel left/right ● switch to select [CANCEL] (off). Stop the vehicle and close the throttle Press on the sel left/right completely. Select the gold image display. switch to select [ACTIVE] (on). (P.77) Select page 4.
Page 126 G switch (Continued) Available settings: [ACTIVE]/[CANCEL] When the gold image is selected: Default: [TOUR MODE]: [CANCEL] ● [URBAN MODE]: [CANCEL] ● [GRAVEL MODE]: [CANCEL] ● [OFF ROAD MODE]: [ACTIVE] ● [USER 1 MODE]: [CANCEL] ● [USER 2 MODE]: [CANCEL] ● G switch [G] G switch [G] [CANCEL] (off)
Page 127 Parking Brake Slot CRF1100D/D4 Lock lever Parking Brake Lever Be sure the parking brake is applied while parking and warming up the engine. Make sure the parking brake lever is released before riding. To apply the parking brake Squeeze the parking brake lever (a) fully Parking brake lever then rotate the lock lever (b) clockwise until To release the parking brake...
Page 128 Handle Grip Heater Handle grip heater indicator: CRF1100A4/D4 This vehicle is equipped with a handle grip Comes on when the handle grip heater is on heater that warms up your hands during ride. and indicates the selected heat level. The Wear gloves to protect your hands from the handle grip heater have 5 levels of heat to heated grips.
Page 129 Push forward or pull backward the To operate handle grip heater function lever to select the handle grip Start the engine. (P.200) heater level. Select the handle grip heater display of pop- The status icon will be appeared on the up information using the function sel display when the handle grip heater...
Page 130 Handle Grip Heater (Continued) Maintains the selected level when the ignition To turn off handle grip heater switch is turned to the OFF position. Select the handle grip heater display pop-up The heater level is not changed if the information using the function sel switch.
Page 131 Honda selectable torque control Torque Control level (engine power control) In the following cases, the Torque Control will be turned on and the specific Torque can be selected or turned on/off. Control level will automatically be set as Do not change the Torque Control level below.
Page 132 Honda selectable torque control (Continued) Torque Control level setting When using the multi-information display: ● When using the favorite switch: Stop the vehicle. ● Select the gold image display. Stop the vehicle. (P.77) Select page 4. Select the [HSTC] of the favorite (P.43)
Page 133 Press the back switch. You can also perform the above settings by using the touch screen. Torque Control on and off Stop the vehicle. Select the gold image display. (P.77) Select page 4. (P.43) Press the switch. Select [HSTC]. Press and hold on the sel left/ right switch to set the [0] (off).
Page 134 Honda selectable torque control (Continued) Level [7] Level [6] Level [5] Level [4] Level [1] Level [2] Level [3] Push on the sel left/right switch [0] (Off) Push on the sel left/right switch or press the favorite switch Push and hold...
Page 135 Wheelie Control Wheelie Control level [W] can be selected or In the following cases, the wheelie control [W] will be turned on and the specific turned on/off. wheelie control level [W] will automatically Do not change the wheelie control level [W] be set as below.
Page 136 Wheelie Control (Continued) Wheelie Control Level setting When using the multi-information display: ● When using the favorite switch: Stop the vehicle. ● Select the gold image display. Stop the vehicle. (P.77) Select page 4. Select the [Wheelie Control] of the (P.43) Press the switch.
Page 137 Press the back switch. You can also perform the above settings by using the touch screen. Wheelie Control on and off Stop the vehicle. Select the gold image display. (P.77) Select page 4. (P.43) Press the switch. Select [W]. Press and hold on the sel left/ right switch to set the [0] (off).
Page 138 Wheelie Control (Continued) Level [3] Level [2] Level [1] [0] (Off) Push on the sel left/right switch Push on the sel left/right switch or press the favorite switch Push and hold on the sel left/right switch Push and hold on the sel left/right switch...
Page 139 Riding mode You can change the riding mode. CRF1100A4/D4 The riding mode consists of the following [PRELOAD] [Preload]: Rear suspension parameters. preload • (Rider): Rider only (Minimum preload) [P] Power: Engine output level • (Rider+Cargo): Rider and luggage [EB] Engine brake: Engine brake level •...
Page 140 Riding mode (Continued) Riding mode has 6 modes. Current riding mode Available riding modes: [TOUR MODE], [URBAN MODE], [GRAVEL MODE], [OFF ROAD MODE], [USER 1 MODE] and [USER 2 MODE] [TOUR MODE], [URBAN MODE], [GRAVEL MODE] and [OFF ROAD MODE] [TOUR MODE]: Enables smooth acceleration even when riding with a [P] [Power]...
Page 141 Initial setting Suspension damping [EB] [G] G [Engine [ABS] ABS Riding modes [Power] Brake] mode switch [Overall] [Front] [Rear] value value [TOUR MODE] Medium Medium ON ROAD CANCEL [URBAN MODE] Medium Medium ON ROAD CANCEL [GRAVEL MODE] Medium Medium OFF ROAD CANCEL [OFF ROAD MODE] Medium...
Page 142 Riding mode (Continued) [PRELOAD] [PRELOAD] [PRELOAD] [PRELOAD] [Preload] [Preload] Riding modes [Preload] [Preload] (Rider+ (Rider+ (Rider) (Rider+Cargo) Passenger+ Passenger) Cargo) [TOUR MODE] [URBAN MODE] [GRAVEL MODE] [OFF ROAD MODE] [USER 1 MODE] [USER 2 MODE] Notes: *1 : CRF1100A4/D4 *2 : Value can be changed.
Page 143 [P] Power value (Engine output level) [S] Overall: suspension damping [P] Power value has four setting levels. CRF1100A4/D4 Available setting range: 1 to 4 [S] Overall value has four setting levels. Level 1 has the maximum power. Available setting range: [H] Hard / [M] Level 4 has the minimum power.
Page 144 Riding mode (Continued) [Rear]: suspension damping [PRELOAD] [Preload] (Rider), (Rider +Cargo), (Rider+Passenger) and (Rider CRF1100A4/D4 [Rear] has three setting levels. +Passenger+Cargo): rear suspension Available setting range: - / Medium / + preload + has the maximum suspension damping. CRF1100A4/D4 - has the minimum suspension damping. [PRELOAD] [Preload] Preload has twenty four setting levels.
Page 145 Selecting the riding mode When using the favorite switch: ● When change the riding mode, the rear Select the [Riding Mode] of the favorite switch. wheel ABS function [ABS RR] will (P.84) Press the favorite switch. automatically be set to [ACTIVE]. When using the sel up switch and ●...
Page 146 Riding mode (Continued) Setting the riding mode You can change the [P] [Power], [EB] [Engine Brake], [S] [Overall], [Front], [Rear], ABS mode [ABS] and [PRELOAD] [Preload] on the [USER 1 MODE] and [USER 2 MODE] of the riding mode. (P.73) Press the sel up switch or press the...
Page 147 Audio System About Your Audio System • Set the volume at a level that still allows horns and emergency vehicles to be This audio system can play audio files on heard. Bluetooth® audio devices (mobile phone, digital audio player or equivalents). •...
Page 148 Bluetooth HFP ver. 1.7 ● SIG, Inc., and any use of such marks by A2DP ver. 1.2 ● Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
Page 149 iPhone iPhone/Mobile phone/ USB connector Bluetooth ® audio device, etc. USB connection (P.195) Bluetooth ® connection GPS antenna (P.154) Bluetooth ® connection (P.159) Left handlebar Bluetooth ® switches connection Bluetooth ® Passenger Multi-information headset (P.159) display Bluetooth ® headset Rider Continued...
Page 150 Audio System (Continued) Basic Operations switch You can operate and set the various Sel up switch functions of the audio system using the touch screen and/or switches on the left handlebar. Goes However, you cannot operate some functions back switch by the touch screen while the vehicle is in motion.
Page 151 Function lever: Push forward or pull Goes back switch: To go back to the beginning of the current backward the lever to adjust the volume. ● or previous song: Press the switch. To increase the volume: Push forward the ● To move rapidly within a track: Press and lever.
Page 152 Audio System (Continued) When you push forward or pull backward the To Adjust the Volume function lever, the volume control level You can adjust the volume settings for the appears on the pop-up information. headsets. The system has the following unique volume levels.
Page 153 To increase the volume: push forward the Auto Volume function lever. Selects the volume setting to automatically To increase the volume rapidly, push increase volume from the headsets as the forward and hold the function lever. speed of the vehicle increases. To decrease the volume: pull backward the To select the Auto Volume: (P.91)
Page 154 Audio System (Continued) Bluetooth ® Audio Bluetooth ® Setting You can connect with your Bluetooth® audio device (mobile phone, digital audio player or equivalents) and Bluetooth® headsets via Bluetooth®. Available devices are as follows: [Phone Pairing] (For Bluetooth® audio device) ●...
Page 155 Bluetooth ® version/profiles Supported Bluetooth® version Bluetooth 2.1 + EDR HFP (Hand Free Profile) ver. 1.5 Bluetooth® profiles (For A2DP (Advanced Audio Distribution Profile) ver. 1.2 iPhone, mobile phone or AVRCP (Audio/Video Remote Control Profile) ver. 1.4 Bluetooth® device) PBAP (Phone Book Access Profile) ver. 1.0 Bluetooth®...
Page 156 Audio System (Continued) Phone Pairing Enable the Bluetooth® function on your device. You can establish a Bluetooth® connection in For details, refer to the instruction two ways. manual of your device. [Discoverable]: Search from the device. ● Select [Bluetooth], and then press the [Phone Pairing]: Search from the system.
Page 157 [Discoverable] switch to [ON] (enable) the function. Select [Discoverable], and then press the switch to [ON] (enable) the function. Tap “Honda Motorcycle #*****” on the Bluetooth® setting menu of the target device. The part of ***** is different letter for each vehicle.
Page 158 Audio System (Continued) The device name and Passkey appear on the When the pairing is complete, the name of screen. Select [Yes], and then press the the paired device are displayed. switch. Icon status: : Phone function connected : Music function connected Return to the riding information, previous screen or Home screen.
Page 159 [Phone Pairing] Select [+Add a device], and then press the switch. Select [Phone Pairing], and then press the The names of the detected device are switch. displayed. If many Bluetooth® devices are detected, the target device may be detected under the list, scroll down the list.
Page 160 Audio System (Continued) Select a target device name, and then press When a request message appears on the switch. target device, tap “Pair.” When the pairing is complete, the name of the paired device are displayed. Icon status: : Phone function connected : Music function connected Select [Yes], and then press the switch.
Page 161 You can also perform the above settings by Headset Pairing using the touch screen. This function is disabled while the vehicle is in motion. To disconnect the phone: Enable the Bluetooth® function on your (P.162) device. For details, refer to the instruction manual of your device.
Page 162 Audio System (Continued) Select [Bluetooth], and then press the Select [+ Add a device], and then press the switch to [ON] (enable) the function. switch. Select [Headset Pairing], and then press the The names of the detected device are switch. displayed.
Page 163 Select a target device name, and then press When the pairing is complete, device name switch. is displayed. Rider When pairing rider headset Passenger When pairing passenger headset Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 164 Audio System (Continued) To Reconnect a Paired Device To Connect/Disconnect Available Automatically Functions Individually When the ignition switch is turned ON Depending on the connected device, this position, the system reconnects with function may not be able to establish a registered devices automatically.
Page 165 To connect functions: Select the paired device, and then [Phone Pairing] press the switch. Select [Phone Pairing], and then press switch to enter the setting menu. Continued...
Page 166 Audio System (Continued) Select [Connect a Phone] or [Connect [Headset Pairing] Select [Headset Pairing], and then Music], and then press the switch press the switch to enter the to [ON] (enable) the function. setting menu.
Page 167 Select the paired device, and then Select [Designate as a Rider] or press the switch. [Connect Headset], and then press the switch to [ON] (enable) the function. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 168 Audio System (Continued) To disconnect functions: Select the paired device, and then [Phone Pairing] press the switch. Select [Phone Pairing], and then press switch to enter the setting menu.
Page 169 Select [Connect a Phone] or [Connect [Headset Pairing] Select [Headset Pairing], and then Music], and then press the switch press the switch to enter the to [OFF] (disable) the function. setting menu. Continued...
Page 170 Audio System (Continued) Select the paired device, and then Select [Designate as a Rider] or press the switch. [Connect Headset], and then press the switch to [OFF] (disable) the function. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 171 To Delete Connected Device Select the paired device, and then press the switch. Select [Bluetooth], and then press the switch. Select [Delete Connected Device], and then press the switch. Select [Phone Pairing] or [Headset Pairing], and then press the switch to enter the setting menu.
Page 172 Audio System (Continued) The name of the device disappears from the Playing Audio screen. The audio system can play music stored on a device connected via Bluetooth®. [3] Album title [5] Progress [2] Artist name [1] Song title Return to the riding information, previous screen or Home screen.
Page 173 Screen Information To Play a Track The information displayed on the screen Connect the device you want to play from. differs depending on the connected device Bluetooth ® setting: (P.162) and the type of file being played back. Select [Media], and then press the The system supports ID3 tag information.
Page 174 Audio System (Continued) Select , and then press the switch. To Pause a Track Select , and then press the switch. You can also perform the above settings by using the touch screen. Return to the riding information, previous screen or Home screen. (P.38) You can also perform the above settings by using the touch screen.
Page 175 To Change a Track To Select the Play Mode To skip to the next song: Press the You can select repeat and random modes. ● skip switch. The audio play mode status icon or color of To move rapidly within a track: Press and the audio play mode status icon changes.
Page 176 Audio System (Continued) Cycles through the play modes as follows: Select , and then press the switch. Select , and then press the switch. (Black) Normal play mode: Plays (Black) No repeat mode: No tracks in original order. repeat. (Blue) Random play mode: Plays (Blue) Album repeat play mode: tracks randomly.
Page 177 Handsfree Calling CRF1100A/D ● While talking, you may be hard to hear Bluetooth ® Handsfree Calling Using due to wind noise during running or Bluetooth® handsfree calling allows you to external noise. In that case, try to change make and receive phone calls using your the position of the microphone.
Page 178 Audio System (Continued) Preparation Making a Call Connect with the paired mobile phone. You can make calls by inputting a phone (P.154) number or by using the phonebook, call The phonebook is updated after every history or speed dial entries. connection.
Page 179 To Make a Call Using the Call History Select [Call History]. Select the phone number you want to call, [Call History] and then press the switch. You can make a call using the call history while the vehicle is in motion. (blue): Dialled call Call history displays the last 30 dialled, (blue): Received call...
Page 180 Audio System (Continued) To Make a Call Using a Speed Dial Entry To end the call, push forward the voice control switch on the left handlebar. [Speed Dial] The same action can be done by You can make a call using the speed dial selecting [End Call] on the screen.
Page 181 To Make a Call Using the Phonebook To end the call, push forward the voice control switch on the left handlebar. [Contacts] The same action can be done by This function is disabled while the vehicle is in selecting [End Call] on the screen. motion.
Page 182 Audio System (Continued) To Make a Call Using a Phone Number Select [CALL], and then press the switch to make a call. [Dial Number] To cancel the call, press the switch. This function is disabled while the vehicle is in When making a call 1 second after the motion.
Page 183 To end the call, push forward the To Store a Phone Number in the Speed voice control switch on the left handlebar. Dial List The same action can be done by Speed dial numbers can be stored. selecting [End Call] on the screen. Select [Speed Dial].
Page 184 Audio System (Continued) Select the phone number you want to store, To Delete a Stored Speed Dial Number and then press and hold the switch. Select [Settings]. The phone number will be stored in the Select the [Edit Speed Dial], and then press speed dial list.
Page 185 Select the phone number you want to Receiving a Call delete, and then press and hold the When there is an incoming call, an audible switch. notification sounds and the Incoming Call screen appears. Return to the riding information, previous screen or Home screen.
Page 186 Audio System (Continued) Ring Tone To Receive a Call If the connected mobile phone supports “in When a call comes in, push forward the band ring tone”, the ring tone stored on the voice control switch on the left handlebar to phone sounds automatically while receiving a receive the call.
Page 187 To Decline a Call To End a Call When a call comes in, push forward and hold While talking, push forward the voice voice control switch on the left control switch on the left handlebar to end handlebar to reject a call. the call.
Page 188 Audio System (Continued) Apple CarPlay In no event shall Honda be liable for any ● damage or trouble that occurs in the use If you connect an Apple CarPlay-compatible of iPhone. iPhone to the system via USB, you can use...
Page 189 Application and menu items displayed on For details on countries and regions ● ● the screen may differ depending on the where Apple CarPlay is available, as well connected device and iOS version. as information pertaining to function, While connected to Apple CarPlay, calls refer to the Apple homepage.
Page 190 Apple CarPlay functionality and services. Honda cannot and does not provide any warranty or guarantee of future Apple CarPlay performance or functionality. It is possible to use 3rd party apps if they are compatible with Apple CarPlay.
Page 191 Pair the headsets. To Setup Apple CarPlay (P.159) Connect your iPhone using a certified cable Use of Apple CarPlay will result in the to the USB socket. transmission of certain user and vehicle (P.195) If the following screen is displayed, Apple information (such as vehicle location, speed, CarPlay can not be used, but USB power and status) to your iPhone to enhance the...
Page 192 Audio System (Continued) When the disclaimer message appears on [Enable] when [Remember My the screen, select [Enable], and then press Choice] is [OFF]: Allows only once. switch. (Prompt shows again next time.) Set [Remember My Choice] to ON so [Enable] when [Remember My that you will not be asked the next time Choice] is [ON]: Allows anytime.
Page 193 To Enable or Disable Apple CarPlay Select [Apple CarPlay], and then press the switch. Select [Connected Services], and then press switch. Select a target device name, and then press switch. Continued...
Page 194 Audio System (Continued) To enable Apple CarPlay: To disable Apple CarPlay: Select [Enable Apple CarPlay], and then Select [Enable Apple CarPlay], and then press the switch to [ON] (enable) the press the switch to [OFF] (disable) the function. function. Return to the riding information, previous Return to the riding information, previous screen or Home screen.
Page 195 To Select Ask On or Ask Off of the Select [Apple CarPlay], and then press the switch. Apple CarPlay disclaimer Screen Select [Connected Services], and then press switch. Select a target device name, and then press switch. Continued...
Page 196 Audio System (Continued) To ask on connection: To ask off connection: Select [Ask on Connection], and then press Select [Ask on Connection], and then press switch to [ON] (ask on) the switch to [OFF] (ask off) the function. function. Return to the riding information, previous Return to the riding information, previous screen or Home screen.
Page 197 To Connect Your iPhone To Disconnect Your iPhone Do not leave your device in the vehicle You can disconnect your iPhone at any time. ● (under the front seat or under the rear Make sure to follow the device’s instructions seat etc.).
Page 198 Audio System (Continued) Apple CarPlay Menu Apple CarPlay menu screen Home screen Messages Music Maps Phone Go to Apple CarPlay Go back to Home screen menu screen Go back to Apple CarPlay menu screen...
Page 199 Display Apple CarPlay map and use the navigation function just as you would on your iPhone. Messages Check and reply to text messages, or have messages read to you. Honda Go back to the Home screen. Go back to the Apple CarPlay menu screen.
Page 200 Audio System (Continued) To Activate Siri Operating Apple CarPlay with Siri Start Apple CarPlay. To activate Siri, pairing with device such as a (P.189) Unlock your iPhone and enable Siri. headset (for rider) must be paired. (P.159) For details, refer to the iPhone User Guide, etc.
Page 201 Say a voice command through the paired headset. CRF1100A/D Siri may not be recognised correctly due to the effect of wind noise during running or external noise. In that case, try to change the position of the microphone. CRF1100A4/D4 Siri may not be recognised correctly due to the effect of wind noise during running or external noise.
Page 202 Starting the Engine Make sure the engine stop switch is in the CRF1100A/A4 Start your engine using the following procedure, (Run) position. regardless of whether the engine is cold or warm. Turn the ignition switch to the ON position. Shift the transmission to Neutral ( indicator come on).
Page 203 Make sure the engine stop switch is in the CRF1100D/D4 (Run) position. Start your engine using the following procedure, regardless of whether the engine is cold or warm. Turn the ignition switch to the ON position. Check the transmission in Neutral ( indicator come on).
Page 204 Shifting Gears Recommended Shift Points CRF1100A/A4 Your vehicle transmission has 6 forward Shifting Up gears in a one-down, five-up shift pattern. From 1st to 2nd 12 mph (20 km/h) From 2nd to 3rd 19 mph (30 km/h) From 3rd to 4th 25 mph (40 km/h) From 4th to 5th 31 mph (50 km/h)
Page 205 Recommended Shift Points CRF1100D/D4 Your vehicle is equipped with an Shifting Up automatically controlled 6-speed From 1st to 2nd 12 mph (20 km/h) transmission. It can be shifted automatically From 2nd to 3rd 19 mph (30 km/h) (by AT MODE) or manually (by MT MODE). From 3rd to 4th 25 mph (40 km/h) From 4th to 5th...
Page 206 Shifting Gears (Continued) Dual Clutch Transmission CRF1100D/D4 N-D switch In order to respond to rider demands in a AT/MT switch broad range of situations, the transmission is equipped with three operating modes, AT MODE (including D mode for regular MODE MODE operation and three levels of S mode for sporty riding);...
Page 207 Neutral (N): Neutral is selected When you can change between N and D automatically when you turn the ignition Vehicle is stopped and the engine is idling. Throttle is completely closed. It is not switch to the ON position. possible to change from Neutral to D mode If neutral is not selected when you turn while the throttle is applied.
Page 208 Shifting Gears (Continued) AT MODE: In this mode the gears are S mode (AT): Select this mode while riding shifted automatically according to your riding in AT MODE when you need more power, conditions. such as when overtaking, climbing hills, And also using the shift up switch (+) or shift pulling away.
Page 209 Changing between Neutral and AT Changing between AT MODE and MT MODE/MT MODE MODE Press the AT/MT switch (e). The AT indicator goes out while MT MODE is Changing from Neutral (N) to AT MODE selected (f). Press the side of the N-D switch (a). The gear position is displayed on the gear position The D mode indicator comes on and first indicator while MT MODE is selected (f).
Page 210 Shifting Gears (Continued) S mode level selecting while in AT N-D switch MODE While in S mode, press and hold the side of the N-D (a) switch. Close the throttle completely. Then select the desired level of the S mode. Level 1 Level 2 Level 1...
Page 211 Riding in MT MODE Gear shift operation Shift up and down with the shift up switch (+) Shifting Up: and shift down switch (−). Press the shift up switch (+) (g). The selected gear is shown on the gear Shifting Down: position indicator.
Page 212 Cruise Control The cruise control system allows you to Cruise control is intended for use only on maintain a steady speed within a specified straight, uncongested highways. Do not use range. cruise control on city streets, winding roads, The available speed setting range and during bad weather, or at any other time operating gear are listed below: when you need total control of the throttle.
Page 213 To Set Cruise Control Make sure the travelling speed and operating gear are conformed to the requirements of the system. Any speed other than the available range Cruise control will not be memorised. SET indicator Press the cruise control main switch. (The cruise control main indicator will come on.)
Page 214 Cruise Control (Continued) or 1 km/h (depending on mileage meter set To Change the Set Speed unit). To Fine Tune the Set Speed Any speed other than the possible setting Select the riding information. (P.38) range will not be indicated (stops at the To increase the set speed: tap the upper or lower limit speed).
Page 215 To decrease speed: push and hold the To Manually Increase Vehicle Speed ● cruise control lever to Use the throttle in the normal manner to accelerate. side. The system will To return to the set speed, close the throttle automatically slow your vehicle. When and coast without applying the brakes.
Page 216 Cruise Control (Continued) To Temporarily Disengage the System To resume cruise control: If you are still over 30 mph (50 km/h), Perform one of the following operations to ● disengage the system temporarily. ( push and release the Cruise control SET indicator temporarily cruise control lever to goes off but the set speed remains in side.
Page 217 Cornering Light Cornering light adjusting screw location CRF1100A4/D4 The cornering light lights up the direction of travel of the vehicle when cornering. Operating conditions: Vehicle has been ridden at a speed of ● over 6 mph (10 km/h). When the vehicle banking left or right. ●...
Page 218 Refueling Ignition key Lock cover Opening the Fuel Fill Cap Open the lock cover, insert the ignition key, and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap After refueling, push the fuel fill cap closed until it locks.
Page 219 To prevent entry of foreign matter into the Use accessory devices at your own risk. In no socket, be sure to close the cover when the event shall Honda be liable for any damages socket is not used. to your accessory device when in use.
Page 220 ( CRF1100A4/D4 USB socket Use USB devices at your own risk. In no event shall Honda be liable for any damage to your USB device when in use. Only USB devices within the following specifications can be connected.
Page 221 Connect a certified USB cable to the socket. To prevent the battery from becoming weak Route the USB cable along the recess. (or dead), keep the engine running while Pass the USB cable through the cover slit drawing current from the socket. and close the cover.
Page 222 Storage Equipment Helmet holder Use the helmet holder only when parked. A helmet holder is located under the rear Removing the rear seat (P.253) seat. WARNING Helmet set wire Riding with a helmet attached to the holder can interfere with your ability to safely operate the vehicle and could lead to a crash in which you can be seriously hurt or killed.
Page 223 Helmet Set Wire Document Bag The helmet set wire is secured on the rear The document bag is located on the fender under the rear seat. underside of the front seat. Helmet set Document bag wire Removing the rear seat Removing the front seat (P.253) (P.251)
Page 224 Storage Equipment (Continued) Fuse Puller, Hex Wrench, Tool Kit Standard/Phillips Screwdriver, Canada Screwdriver Handle The tool kit is located in the tool box. The fuse puller, hex wrench, standard/phillips Tool box screwdriver and screwdriver handle are located on the underside of the rear seat. Standard/Phillips Hex wrench Tool kit...
Page 225 Rear Carrier CRF1100A4/D4 Never exceed the maximum weight limit. Maximum Weight: 22 lb (10 kg) Rear carrier...
Page 226: Maintenance
Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ......P. 225 Spark Arrester ..........P. 258 Maintenance Schedule........P. 227 Engine Oil ............P. 260 Maintenance Record ........
Page 227: Importance Of Maintenance
Importance of Maintenance For information about the exhaust emission and Importance of Maintenance noise emission requirements of the U.S. Keeping your vehicle well-maintained is Environmental Protection Agency (EPA), the absolutely essential to your safety and to California Air Resources Board (CARB), and the protect your investment, obtain maximum Environment and Climate Change Canada performance, avoid breakdowns, and reduce air...
Page 228 Importance of Maintenance Maintenance Safety Always read the maintenance instructions before you begin each task, and make sure that you have the tools, parts, and skills required. We cannot warn you of every conceivable hazard that can arise in performing maintenance.
Page 229: Maintenance Schedule
Maintenance work should be performed in owner. accordance with Honda's standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. All scheduled maintenance is considered a normal owner operating cost and will be charged to you by your dealer.
Page 230 : Intermediate. We recommend service by your dealer, unless Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Lubricate Procedures are provided in an official Honda Service Replace Manual (2 P. 338). Clean : Technical.
Page 231 Maintenance Schedule Frequency Items × 1,000 mi Regular Refer to Replace page × 1,000 km 12.8 19.2 25.6 32.0 38.4 Drive Chain Every 600 mi (1,000 km): Drive Chain Slider – Brake Fluid 2 Years Brake Pads Wear Brake System Brake Light Switch Brake Lock Operation Headlight Aim...
Page 232: Maintenance Record
Maintenance Record Distance Odometer Date Performed By: Notes 600 miles (1,000 km) 4,000 miles (6,400 km) 8,000 miles (12,800 km) 12,000 miles (19,200 km) 16,000 miles (25,600 km) 20,000 miles (32,000 km) 24,000 miles (38,400 km) 28,000 miles (44,800 km) 32,000 miles (51,200 km) 36,000 miles (57,600 km) 40,000 miles (64,000 km)
Page 233: Maintenance Fundamentals
Maintenance Fundamentals Check the following items if you are carrying a Pre-ride Inspection passenger or cargo: To ensure safety, it is your responsibility to Combined weight is within load limits. ● perform a pre-ride inspection and make sure P. 351 that any problem you find is corrected.
Page 234 Maintenance Fundamentals Check the following items at regular intervals: Before riding off-road check all of the preceding Oil level is between the upper and lower plus the following: ● level marks. P. 260 Make sure spokes are tight. Check the rims ●...
Page 235 Maintenance Fundamentals regardless of how often you ride, or more often Periodic Checks if you ride frequently. You should also perform other periodic Also, check the odometer reading against the maintenance checks at least once a month Maintenance Schedule and perform all maintenance that is due.
Page 236 Maintenance Fundamentals Replacing Parts Always use Honda Genuine Parts or their equivalents to ensure reliability and safety. When ordering colored components, specify the model name, color, and code mentioned on the color label. The color label is attached to the rear fender under the rear seat.
Page 237 Maintenance Fundamentals WARNING Lithium-Ion (Li-Ion) Battery Your vehicle has a lithium-ion (li-ion) battery. The battery contains flammable organic Clean the battery terminals if they become dirty solvent as electrolyte. or corroded. You can be burned or seriously injured NOTICE An improperly disposed of battery can be if the battery is handled improperly.
Page 238 Maintenance Fundamentals Cleaning the Battery Terminals Charging Remove the battery. P. 248 If you use electrical accessories that drain the If the terminals are starting to corrode and battery or you do not ride frequently, we are coated with a white substance, wash recommend that you charge the battery every with warm water and wipe clean.
Page 239 For fuse Bump starting is not recommended. ratings, see “Specifications.” P. 354 NOTICE Blown Installing non-Honda electrical accessories can fuse overload the electrical system, discharging the battery and possibly damaging the system. Fuses Fuses protect the electrical circuits on your NOTICE vehicle.
Page 240 Conserving” or “Resource Conserving” on the For recommended engine oil, see circular API service symbol. “Specifications.” P. 353 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: JASO T 903 standard : MA ●...
Page 241 Wipe up spills immediately and wash thoroughly. Also inspect the drive sprocket and driven Recommended brake fluid: sprocket. If either has worn or damaged teeth, Honda DOT 4 Brake Fluid or equivalent have the sprocket replaced by your dealer. WARNING Clean filler cap before removing. Use only DOT 4 fluid from a sealed container.
Page 242 O-ring chains, or neutral detergent. Use a soft spray onto your clothes and the vehicle. brush if the chain is dirty. After cleaning, wipe dry and lubricate with the recommended lubricant. Recommended lubricant: Pro Honda HP Chain Lube or equivalent...
Page 243 Maintenance Fundamentals A concentration of up to 60% will provide better Recommended Coolant protection in colder climates. Pro Honda HP Coolant is a pre-mixed solution NOTICE of antifreeze and distilled water. Using coolant not specified for aluminum Concentration: engines or tap/mineral water can cause 50% antifreeze and 50% distilled water corrosion.
Page 244 Maintenance Fundamentals If you decide to adjust the tire pressure for a Tires (Inspecting/Replacing) particular off-road riding condition, make Checking the Air Pressure changes a little at a time. Visually inspect your tires and use an air CRF1100A4/D4 pressure gauge to measure the air pressure Even if the direction of the valve stem is before each off-road ride and whenever you changed, do not return it to the original...
Page 245 Maintenance Fundamentals Inspecting for Damage Inspecting Tread Depth Inspect the tread wear indicators. If they Inspect the tires for become visible, replace the tires immediately. cuts, slits, or cracks that For safe riding, you should replace the tires exposes fabric or when the minimum tread depth is reached.
Page 246 WARNING of the same size, construction, speed rating, Riding on tires that are excessively worn and load range. Have the wheel balanced with Honda or improperly inflated can cause a crash ● Genuine balance weights or equivalent after in which you can be seriously hurt or the tire is installed.
Page 247 Maintenance Fundamentals Remember to replace the inner tube Tire Service Life ● whenever you replace a tire. The old tube The service life of your tires is dependent on will probably be stretched, and it could fail if many factors, including, but not limited to, installed in a new tire.
Page 248 Maintenance Fundamentals Tire Identification Number (TIN) The tire identification number (TIN) is a group of numbers and letters located on the sidewall of the tire. DOT XXXX XXXX 22 09 DOT: This indicates that the tire meets all requirements of the U.S. Department of Transportation.
Page 249: Tool
Tool You can perform some roadside repairs, minor The helmet set wire is secured with the rear adjustments and parts replacement with the fender under the rear seat. P. 221 provided tools. Helmet set wire ● The 5 mm hex wrench, standard/phillips Canada The tool kit is stored in the tool box.
Page 250: Removing & Installing Body Components
Removing & Installing Body Components Battery Remove the tool box. P. 257 Disconnect the negative - terminal from the battery. Positive terminal Disconnect the positive + terminal from Terminal nuts the battery. Remove the clip. P. 250 Negative Open the battery box band. terminal Clip Remove the battery from the battery case...
Page 251: Battery Box Cover
Removing & Installing Body Components Battery Box Cover Battery Box Cover Removal Remove the bolts using the hex wrench Battery box cover provided on the underside of the rear seat. P. 222 Remove the battery box cover. Installation Install the parts in the reverse order of removal.
Page 252: Clip
Removing & Installing Body Components Clip Clip Installation Insert the clip into the hole. Removal Push the pin in. Remove the pin by a Phillips screwdriver. Pull the clip out of the hole.
Page 253: Front Seat
Removing & Installing Body Components Front Seat Front Seat Installation When setting the high seat position: Removal Insert the front lower prong and center lower prongs into the front stay and Front seat center stays on the fuel tank, and insert the rear hooks into the upper slots.
Page 254 Removing & Installing Body Components Front Seat Low position: High position: Center Center Rear upper Rear Front lower Front hooks prongs hooks upper prongs lower prong prong Front Front seat seat Lower slots Upper slots Front stay Center stays Front stay Center stays...
Page 255: Rear Seat
Removing & Installing Body Components Rear Seat Rear Seat Install the front seat while pushing it forward and downward. Make sure that the seat is locked CRF1100A/D securely in position by pulling it up Rear seat Tabs lightly. Tabs Seat lock Install the rear seat.
Page 256 Removing & Installing Body Components Rear Seat Removal CRF1100A4/D4 Rear seat Tabs CRF1100A/D Tabs Move the seat strap forward. Insert the ignition key into the seat lock. Turn the ignition key clockwise, then push Recesses the rear seat forward and up. Seat lock Installation Recesses...
Page 257: Skid Plate
Removing & Installing Body Components Skid Plate Skid Plate Prong CRF1100A4/D4 Bolt B Prong CRF1100A/D Skid plate Skid plate Collar Washer Washers Collar Grommet Grommet Washers Bolts A Bolts A Continued...
Page 258 Removing & Installing Body Components Skid Plate Removal Installation Install the skid plate in the reverse order CRF1100A/D Remove the bolts A and washers. using of removal. the hex wrench provided on the Install the collar. underside of the rear seat. P.
Page 259: Tool Box
Removing & Installing Body Components Tool Box Tool Box Removal Remove the bolts using the hex wrench Bolts provided on the underside of the rear Tabs seat. P. 222 Remove the tool box by releasing its slots from the tabs. Installation Install the parts in the reverse order of removal.
Page 260: Spark Arrester
Spark Arrester Cleaning the Spark Arrester Tail cap Regular servicing prevents carbon buildup (which can diminish engine performance) and also complies with USDA regulations for regular maintenance to assure proper function. The spark arrester prevents random sparks from the combustion process in your engine from reaching the environment.
Page 261 Spark Arrester Cleaning the Spark Arrester Remove the spark arrester mounting bolts, spark arresters and gaskets from the muffler. Spark arrester mounting bolts Spark arrester Spark arrester screen Install the gaskets and the spark arresters, and tighten the spark arrester mounting bolts.
Page 262: Engine Oil
Engine Oil Checking the Engine Oil Oil fill cap Upper Place your vehicle on its side stand on a level firm, level surface. If the engine is cold, idle the engine for 3 to 5 minutes. Turn the ignition switch to the OFF position and wait for 2 to 3 minutes.
Page 263 Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil. oil can cause damage to your engine. Do not mix P.
Page 264: Coolant
Coolant Checking the Coolant Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between the UPPER level and LOWER level marks on the reserve tank.
Page 265 Coolant Adding Coolant Remove the reserve tank cap and add Reserve tank cap fluid while monitoring the coolant level. Do not overfill above the UPPER level mark. Make sure no foreign objects enter the reserve tank opening. Securely reinstall the reserve tank cap. WARNING Removing the radiator cap while the engine is hot can cause the coolant to...
Page 266: Brakes
Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or the brake lever and pedal freeplay becomes excessive, Place your vehicle in an upright position inspect the brake pads for wear. on a firm, level surface.
Page 267 Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Always inspect both left and right Check the condition of the brake pad wear brake calipers. indicators. Inspect the brake pads from the rear The pads need to be replaced if a Rear Front...
Page 268 Brakes Checking the Parking Brake Checking the Parking Brake Place your vehicle on a firm, level surface. Stop the engine and push your vehicle while set the parking brake to check the efficacy of CRF1100D/D4 the parking brake. Lock lever If the efficacy of the parking brake becomes weak, have the brake adjusted by your dealer.
Page 269 Brakes Adjusting the Brake Light Switch Adjusting the Brake Light Brake light switch Switch Check the operation of the brake light switch. Hold the brake light switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.
Page 270: Side Stand
Side Stand Checking the Side Stand CRF1100A/A4 Sit on the vehicle, shift the transmission to Neutral, and raise the side stand. CRF1100D/D4 Sit on the vehicle and raise the side stand. CRF1100A/A4 Start the engine, pull the clutch lever in, and shift the transmission into gear.
Page 271: Drive Chain
Drive Chain Inspecting the Drive Chain Check the slack in the lower half of the drive chain midway between the Slack sprockets. Check the drive chain slack at several points Drive chain slack: along the chain. If the slack is not constant at 1 3/8 - 1 3/4 in (35 - 45 mm) all points, some links may be kinked and Do not ride your vehicle if the slack...
Page 272 Drive Chain Inspecting the Drive Chain Slack Inspect the sprockets. P. 239 Clean and lubricate the drive chain. P. 240...
Page 273: Wheels
Wheels Wheels Rims & Spokes It is not necessary to remove the wheels to perform the recommended service in the Maintenance Schedule. However, information Keeping the wheels true (round) and for wheel removal is provided for emergency maintaining correct spoke tension is critical to situations.
Page 274 Wheels Wheels Rims & Spokes Inspect the wheel rims and spokes for CRF1100A/D damage. Wheel Tighten any loose spokes. CRF1100A4/D4 Use the ballpoint hexagon wrench with Spoke a length of 5.5 in (140 mm) or more. Rotate the wheel slowly to see if it appears to “wobble.”...
Page 275: Clutch
Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary have it replaced by your dealer. CRF1100A/A4 Lubricate the clutch cable with a Checking the Clutch Lever Freeplay commercially available cable lubricant to prevent premature wear and corrosion. Check the clutch lever freeplay.
Page 276 Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper lock nut Freeplay – CRF1100A/A4 Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. Loosen the upper lock nut. Turn the upper clutch cable adjuster until Upper clutch cable adjuster the freeplay is 3/8 - 13/16 in (10 - 20 mm).
Page 277 Clutch Adjusting the Clutch Lever Freeplay Loosen the upper lock nut and turn the Lower lock nut upper clutch cable adjuster all the way in (to provide maximum freeplay). Tighten the upper lock nut. Loosen the lower lock nut. Turn the lower clutch cable adjusting nut until the clutch lever freeplay is 3/8 - 13/16 in (10 - 20 mm).
Page 278: Throttle
Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, close automatically, have the vehicle inspected by your dealer. Throttle...
Page 279: Other Adjustments
Other Adjustments Adjusting the Brake Lever Adjuster You can adjust the distance between the tip of the brake lever and handle grip. Adjustment method Index mark Turn the adjuster until the numbers align with Forward the index mark while pushing the lever forward in the desired position.
Page 280: Adjusting The Front Suspension
Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload CRF1100A/D You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using a suitable box end wrench. Adjuster The spring preload adjuster has 15 turns.Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease spring...
Page 281 Other Adjustments Adjusting the Front Suspension Rebound Damping Reference CRF1100A/D punch mark You can adjust the rebound damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
Page 282 Other Adjustments Adjusting the Front Suspension Compression Damping CRF1100A/D You can adjust the compression damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat. P.
Page 283 Other Adjustments Adjusting the Front Suspension Damping • Available setting range: [Overall]: [H] Hard / [M] Medium / [S] CRF1100A4/D4 Soft / [O] Off Road When the riding mode is changed, front ● [Front]: [-]/[Medium]/[+] suspension damping is automatically • Default: selected to a setting corresponding to the [Overall] riding mode.
Page 284: Adjusting The Rear Suspension
Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension Spring Preload CRF1100A/D You can adjust the spring preload by the adjuster knob to suit the load or the road surface. The spring preload adjuster has 35 position or more. Turn the clockwise to increase spring preload (high), or turn counterclockwise to decrease spring preload Adjuster knob...
Page 285 Other Adjustments Adjusting the Rear Suspension Select [PRELOAD]. CRF1100A4/D4 The electrical adjustable suspension allows Push the of the sel left/ the preload of the rear suspension to be right switch until the desired value is adjusted in four levels according to riding displayed.
Page 286 Other Adjustments Adjusting the Rear Suspension The rear suspension adjustment provides the NOTICE following settings. The rear shock absorber damper unit contains high pressure nitrogen gas. Do not attempt to Status icon Riding condition disassemble, service, or improperly dispose of Rider only the damper.
Page 287 Other Adjustments Adjusting the Rear Suspension Rebound Damping Reference CRF1100A/D punch mark You can adjust the rebound damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
Page 288 Other Adjustments Adjusting the Rear Suspension Compression Damping Reference CRF1100A/D punch You can adjust the compression damping by mark the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
Page 289 Other Adjustments Adjusting the Rear Suspension Damping • Available setting range: [Overall]: [H] Hard / [M] Medium / [S] CRF1100A4/D4 Soft / [O] Off Road When the riding mode is changed, rear ● [Rear]: [-]/[Medium]/[+] suspension damping is automatically • Default: selected to a setting corresponding to the [Overall] riding mode.
Page 290: Adjusting The Windscreen Height
Other Adjustments Adjusting the Windscreen Height Adjusting the Windscreen Release the right and left lock levers at the desired position while checking height Height the indicator. Make sure that the windscreen is CRF1100A4/D4 locked securely by slightly moving the You can adjust the windscreen height 1 of 5 right and left lock levers up or down.
Page 291 Other Adjustments Adjusting the Windscreen Height If the windscreen does not move smoothly, clean the sliders using a sponge or a soft towel with neutral detergent to remove dust. Do not apply a lubricant to the sliders. If the windscreen does not move smoothly after cleaning the sliders, have your vehicle inspected by your dealer.
Page 292: Troubleshooting
Troubleshooting Engine Will Not Start........P. 291 Coolant Temperature Gauge Failure Overheating (Segment H flashes in coolant Indication ............P. 298 temperature gauge) ........P. 292 Handle Grip Heater Failure Indication ..P. 298 Warning Indicators On or Flashing..... P. 293 Tire Puncture ............
Page 293: Engine Will Not Start
Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 200 sequence.
Page 294: Overheating (Segment H Flashes In Coolant Temperature Gauge)
Overheating (Segment H flashes in coolant temperature gauge) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the ignition switch to the All segments turn red and the segment H OFF position. ●...
Page 295: Warning Indicators On Or Flashing
Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious problem. Have your vehicle inspected by If the low oil pressure indicator comes on, your dealer.
Page 296: Abs (Anti-Lock Brake System) Indicator
Warning Indicators On or Flashing ABS (Anti-lock Brake System) Indicator ABS (Anti-lock Brake System) If the ABS indicator stays on, your brakes will continue to work as a conventional system, Indicator but without the anti-locking function. If the indicator operates in one of the The ABS indicator may flash if you turn the following ways, you may have a serious rear wheel while the rear wheel is lifted off...
Page 297: Torque Control Indicator
Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator Even when the Torque Control indicator is on, your vehicle will have normal riding ability without Torque Control function. If the indicator operates in one of the When the indicator comes on while the following ways, you may have a serious Torque Control is in operation, you will problem with the Torque Control.
Page 298: If The "-" Indicator Is Blinking In The Gear Position Window While Riding
If the “–” Indicator is Blinking in the Gear Position Window While Riding CRF1100D/D4 If you still cannot start the engine: If the “–” indicator is blinking while riding, you Start the engine while applying the brake may have a serious problem with the Dual lever or pressing the brake pedal.
Page 299: Other Warning Indications
Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, all segments will blink as shown in the illustration. If these occur, see your dealer as soon as possible.
Page 300: Coolant Temperature Gauge Failure Indication
Other Warning Indications Coolant Temperature Gauge Failure Indication Coolant Temperature Gauge Handle Grip Heater Failure Failure Indication Indication If the cooling system has an error, all CRF1100A4/D4 segments will blink as shown in the If the handle grip heater system has an error, illustration.
Page 301: Tire Puncture
Tire Puncture Repairing a puncture or removing a wheel Riding your vehicle with a temporary tire requires special tools and technical expertise. repair is very risky. Do not exceed 30 mph We recommend you have this type of service (50 km/h). Have the tire replaced by your performed by your dealer.
Page 302 Tire Puncture Tube Repair and Replacement Tube Repair and Replacement Anytime a tube is replaced, the tire should be carefully inspected as described. CRF1100A/D WARNING If a tube is punctured or damaged, you Riding your vehicle with a temporary should replace it as soon as possible. A tube tire or tube repair can be risky.
Page 303: Audio System Trouble
Audio System Trouble Symptom Cause/remedy Some Bluetooth® devices and application software you use may be incompatible with the audio system and/or the operable functions may be limited. Check that the audio system and Bluetooth® device are both in pairing mode. P.
Page 304 Audio System Trouble Symptom Cause/remedy Depending on the Bluetooth® device and application software you use, it may take some time for the audio system to connect to a device and to start playing an audio file. The connection may be temporarily disconnected when starting Unable to connect the engine, which is normal and not a malfunction.
Page 305 Audio System Trouble Symptom Cause/remedy Some Bluetooth® devices and application software you use may not connect automatically. For connecting, follow the instructions in the instruction manual of your Bluetooth® device. The Bluetooth® devices that can be connected at the same time are limited to one Bluetooth®...
Page 306 Audio System Trouble Symptom Cause/remedy Some Bluetooth® devices and application software you use may be incompatible with the audio system and/or audio files may not be played properly. Check the recommended specifications. P. 153 Depending on the Bluetooth® device and application software Connected, but does not you use, an audio file may not play automatically.
Page 307 Audio System Trouble Symptom Cause/remedy Presence of another Bluetooth® device or a device that emits electromagnetic waves such as communication equipment in the vicinity sometimes affects the communication. Due to the characteristics of Bluetooth®, though in rare cases, the system operation may become unstable. When it remains unstable, turn off the power to the audio system or the device Sounds skip being used, and then turn it on again.
Page 308 Audio System Trouble Symptom Cause/remedy Depending on the Bluetooth® device and application software you use, an audio file may not play normally after receiving a telephone call, etc. Turn off the power to the audio system and then turn it on again. If the skipping of sounds or mixing of noises Sounds skip continues, check the status of your Bluetooth®...
Page 309 Audio System Trouble Symptom Cause/remedy Adjust the volume while in the individual modes. P. 91 Audio volume from Check the volume setting of the Bluetooth® audio device. headset is low/high. Check the volume setting of the paired headset. Depending on the audio device and the audio file, nothing may be displayed or the display may be inaccurate in some cases.
Page 310 Audio System Trouble Symptom Cause/remedy Connected Bluetooth® device may be an unsupported device. Check the supported Bluetooth® version/profiles. P. 153 When the Bluetooth® connection is unstable due to surrounding Bluetooth® handsfree conditions or radio wave conditions, the handsfree calling calling cannot be available. functions may not be available.
Page 311 Audio System Trouble Symptom Cause/remedy Depending on the connection status, the times displayed in call history on the vehicle side or the phone side may differ. Depending on your mobile carrier plan, available functions may Bluetooth® Handsfree differ. Calling A display delay may occur depending on the number of phone books, call history and music data etc.
Page 312 Audio System Trouble Symptom Cause/remedy Connected iPhone may be an unsupported model. Check the models compatible with Apple CarPlay. P. 186 Connected iPhone may be an unsupported iOS version. Update the iPhone to the newer version. Apple CarPlay is not be To use Apple CarPlay, a headset connection is necessary.
Page 313 Audio System Trouble Symptom Cause/remedy When the paired headset connection is broken due to headset battery depletion or communication failure, Apple CarPlay cannot be used until the connection is restored. The screen will not switch to Apple CarPlay automatically, other than when the ignition switch is turned to the OFF position with Apple CarPlay activated.
Page 314 Audio System Trouble Symptom Cause/remedy You cannot operate Apple CarPlay by the touch panel while the Connected, but does not vehicle is in motion. Operate with the left handlebar switches or operate Apply CarPlay. park your vehicle in a safe place, then operate. Some functions of Apple Some functions may be limited due to condition of mobile CarPlay not available.
Page 315 Audio System Trouble Symptom Cause/remedy To protect the system, some operations may be limited High temperature/ temporarily. The system automatically recovers after the cause is overcurrent protection solved. The statements in this owner's manual may not match your Software update vehicle's Audio System after performing the software update.
Page 316: Electrical Trouble
Electrical Trouble Battery Goes Dead Burned-out Light Bulb Battery charging is needed. All light bulbs on the vehicle are LEDs. If A battery charger recommended by your there is an LED which is not turned on, see lithium-ion (li-ion) battery manufacturer is your dealer for servicing.
Page 317: Blown Fuse
Electrical Trouble Blown Fuse Blown Fuse Before handling fuses, see “Inspecting and Replacing Fuses.” P. 237 Fuse Box Fuses & ABS FSR Fuse Remove the front seat. P. 251 Open the fuse box covers. Pull the fuses out with the fuse puller Fuse box provided on the underside of the rear cover...
Page 318 Electrical Trouble Blown Fuse Main Fuse & ABS Main Fuse Remove the battery box cover. P. 249 Pull the starter magnetic switch out. Remove the starter magnetic switch Starter magnetic cover. switch cover Pull the main fuse and ABS main fuse out ABS main with the fuse puller provided on the fuse...
Page 319 Electrical Trouble Blown Fuse FI Fuse & Main 2 Fuse Remove the battery box cover. P. 249 Pull the FI fuse box and main 2 fuse box CRF1100A/A4 suspension out. Open the fuse box cover. Fuse box covers Pull the FI fuse and main 2 fuse out with the fuse puller provided on the underside of the rear seat ( P.
Page 320 Electrical Trouble Blown Fuse FI Fuse & Main 2 Fuse & DCT Main Remove the battery box cover. P. 249 Fuse Pull the main 2 fuse/FI main fuse box and DCT fuse box suspension out. CRF1100D/D4 Open the fuse box covers. Pull the FI fuse, main 2 fuse and DCT main Fuse box covers fuse out with the fuse puller provided on...
Page 321: Information
You & the Environment ......... P. 330 Vehicle Identification Number..... P. 331 Emission Control Systems ......P. 332 Catalytic Converter ......... P. 336 Oxygenated Fuels..........P. 337 Authorized Manuals ........P. 338 Warranty Coverage and Service ....P. 339 Honda Contacts ..........P. 342...
Page 322: Service Diagnostic Recorders
However this data may be accessed by Honda, key number. its authorised dealers and authorised repairers, employees, representatives and contractors only...
Page 323: Instruments, Controls, & Other Features
Instruments, Controls, & Other Features Instruments, Controls, & Ignition key Key tag Other Features Ignition Switch Leaving the ignition switch in the ON position with the engine stopped will drain the battery. Do not turn the key while riding. Engine Stop Switch Key number and bar code Do not use the engine stop switch except in an emergency.
Page 324 Instruments, Controls, & Other Features Odometer Audio system The display locks at 999,999 when the read-out The audio systems on your vehicle emit radio exceeds 999,999. waves when in operation. FCC CAUTION: Tripmeter Changes or modifications not expressly approved The tripmeters return to 0.0 when each read- by the party responsible for compliance could out exceeds 9,999.9.
Page 325 Instruments, Controls, & Other Features Document Bag Assist-slipper Clutch System The owner’s manual, registration, and insurance CRF1100A/A4 information can be stored in the plastic The assist-slipper clutch system helps to prevent document bag located on the underside of the the rear tire from locking up when the front seat.
Page 326: Caring For Your Vehicle
Automatic Brightness Control and Background Control Frequent cleaning and polishing is important to Ambient brightness is detected by the ensure the life of your Honda. A clean vehicle photosensor. makes it easier to spot potential problems. Do not damage or cover the photosensor.
Page 327 Caring for Your Vehicle Thoroughly rinse your vehicle with plenty of Washing Precautions clean water and dry with a soft, clean cloth. Follow these guidelines when washing: After the vehicle dries, lubricate any moving Do not use high-pressure washers: ● parts.
Page 328 Caring for Your Vehicle Do not direct water at the air cleaner: Aluminum Components ● Water in the air cleaner can prevent the Aluminum will corrode from contact with dirt, engine from starting. mud, or road salt. Clean aluminum parts Do not direct water near the headlight: ●...
Page 329 Caring for Your Vehicle Panels Windscreen Follow these guidelines to prevent scratches Using plenty of water, clean the windscreen with a soft cloth or sponge. (Avoid using detergents and blemishes: or any kind of chemical cleaner on the Wash gently using a soft sponge and plenty ●...
Page 330: Storing Your Vehicle
Storing Your Vehicle Storing Your Vehicle Exhaust Pipe and Muffler The exhaust pipe and muffler are stainless steel If you store your vehicle outdoors, you should but may become stained by mud or dust. consider using a full-body cover. If you won't be riding for an extended period, To remove mud or dust, use a wet sponge and follow these guidelines: a liquid kitchen abrasive, then rinse well with...
Page 331: Transporting Your Vehicle
For more information about storage, Canada NOTICE visit our website at www.honda.ca and look up Towing your vehicle can cause serious damage “Storage Tips” under the “Honda Warranty” in to the transmission. the Warranty tab for your Model.
Page 332: You & The Environment
You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling center. but you must do your part to protect the Call your local or state office of public works or environment.
Page 333: Vehicle Identification Number
Vehicle Identification Number Vehicle Identification Number The VIN and engine serial number uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place.
Page 334: Emission Control Systems
Emission Control Systems Emission Control Systems Compliance with the terms of the Distributor's Warranties for Honda Motorcycle Your vehicle engine emits combustion Emission Control Systems is necessary in order byproducts, including carbon monoxide (CO), to maintain a valid emissions system warranty.
Page 335 Emission Control Systems Ignition Timing Control System Noise Emission Requirements The ignition timing control system adjusts the The EPA requires that vehicles built after ignition timing to reduce the amount of HC, January 1, 1983 comply with applicable noise CO, and NOx produced. emission standards for one year or 3,730 miles (6,000 km) after the time of purchase when Secondary Air Injection System...
Page 336 Emission Control Systems Crankcase Emissions Control System Noise Emission Control System The engine is equipped with a closed crankcase TAMPERING WITH THE NOISE CONTROL system to prevent discharging crankcase SYSTEM IS PROHIBITED: emissions into the atmosphere. U. S. federal law prohibits, and Canadian Blow-by gas is returned to the combustion provincial laws may prohibit, the following acts chamber through the crankcase breather hose,...
Page 337 Emission Control Systems AMONG THOSE ACTS PRESUMED TO Problems Affecting Vehicle Exhaust CONSTITUTE TAMPERING ARE THE Emissions FOLLOWING ACTS: Have your vehicle inspected and repaired by Removal of, or puncturing the muffler, ● your dealer if you experience any of the baffles, header pipes or any other following symptoms: component which conducts exhaust gases.
Page 338: Catalytic Converter
A defective catalytic converter contributes to air riding and turn off the engine. Have your pollution and can impair your engine's vehicle serviced as soon as possible. performance. A replacement unit must be an original Honda part or equivalent.
Page 339: Oxygenated Fuels
Oxygenated Fuels Oxygenated Fuels system or performance problems resulting from the use of an oxygenated fuel containing higher Some conventional fuels blended with alcohol percentages are not covered by your warranty. or an ether compound are available in some NOTICE locales to help reduce emissions to meet clean Improper use of oxygenated fuels can damage air standards.
Page 340: Authorized Manuals
Authorized Manuals Authorized Manuals These Honda manuals are written for the professional technician. However, if you possess The Service Manual used by your the proper tools, observe the safety standards, authorized dealer is available from your Honda and are mechanically capable, you should find dealer or Helm, Inc.
Page 341: Warranty Coverage And Service
Service workmanship of your Honda. Your warranty coverage does not apply to the normal wear Coverage and deterioration associated with use of the Your new Honda is covered by the following vehicle. warranties: Vehicle Limited Warranty ● Your warranty coverage is not voided if you Emission Control System Warranty ●...
Page 342 Warranty Coverage and Service performed by a person other than an Statement on Warranty Coverage for authorized service provider caused damage to Aftermarket and Recycled Parts another part of the vehicle otherwise covered New Jersey under warranty before denying warranty The Magnuson-Moss Warranty Act, 15 U.S.C.
Page 343 If a misunderstanding occurs and you aren't vehicle, call the service department of your satisfied with your dealer's handling of the Honda dealer. Make an appointment for an situation, we suggest you discuss your problem inspection and diagnosis. You will be asked to...
Page 344: Honda Contacts
Name, address, and telephone number ● Mailstop: 100-4W-5F, Product model, year, and VIN ● Telephone: (866) 784-1870 Date of purchase ● Website: https://powersports.honda.com/ Dealer name and address ● contact-us We will likely ask your Honda dealer to respond, or possibly acknowledge your comments directly.
Page 345 Honda Contacts Your Honda Dealer The service department of your Honda dealer offers trained personnel to perform regular maintenance and unexpected repairs. It has the latest available service information from Honda and also handles warranty inspections and repairs. The parts department offers Honda Genuine...
Page 346: Reporting Safety Defects
Reporting Safety Defects Reporting Safety Defects dealer, or American Honda Motor Co., Inc. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co.,...
Page 347 However, Transport Canada cannot become involved in individual problems between you, your dealer, or Honda Canada Inc. Continued...
Page 348 Reporting Safety Defects To contact Transport Canada’s Defect Investigations and Recalls Division, you may call: 1-800-333-0510 For more information on reporting safety defects or about motor vehicle safety, go to http://www.tc.gc.ca/roadsafety.
Page 349: Legal Information On Apple Carplay
Legal Information on Apple CarPlay Legal Information on OF CARPLAY, INCLUDING THE POTENTIAL FOR DRIVER DISTRACTION. Apple CarPlay SEE APPLE’S PRIVACY POLICY FOR DETAILS REGARDING APPLE'S USE AND HANDLING OF OWNER’S MANUAL LICENSE/LIABILITY DATA UPLOADED BY CARPLAY. STATEMENTS USE OF APPLE CARPLAY IS SUBJECT TO YOUR AGREEMENT TO THE CARPLAY TERMS OF USE, WHICH ARE INCLUDED AS PART OF THE APPLE iOS TERMS OF USE.
Page 350 HONDA HEREBY DISCLAIMS ALL WARRANTIES LOSS OF APPLICATION DATA, WHICH MAY BE AND CONDITIONS WITH RESPECT TO THE LOST AT ANY TIME; HONDA DOES NOT APPLICATIONS AND INFORMATION ON THE GUARANTEE THAT THE APPLICATIONS OR APPLICATIONS, EITHER EXPRESS, IMPLIED OR...
Page 351 UPDATES, ETC., SERVICES MAY BE (CONTRACT, TORT OR OTHERWISE) AND UNAVAILABLE IN YOUR AREA OR LOCATION, EVEN IF HONDA WERE ADVISED OF THE ETC. IN ADDITION, YOU UNDERSTAND THAT POSSIBILITY OF SUCH DAMAGES. SOME CHANGES IN THIRD PARTY TECHNOLOGY OR...
Page 352: Software Upgrades
Software Upgrades Software Upgrades Upgrades Honda is continually expanding the scope of the system software. The softwares are updated to correspond with new version releases. For the software updates, contact your dealer.
Page 353: Specifications
Specifications Main Components ■ CRF1100A/D 454 lb (206 kg) Overall length 91.7 in (2,330 mm) Maximum weight capacity CRF1100A4/D4 Overall width 37.8 in (960 mm) 450 lb (204 kg) CRF1100A/D CRF1100A4/D4 Maximum weight on rear 54.9 in (1,395 mm) Overall height carrier 22 lb (10 kg) CRF1100A4/D4...
Page 354 Specifications Service Data ■ HY110 Battery Front 90/90-21M/C 54H 12 V-6 Ah (20 HR) Tire size CRF1100A/A4 Rear 150/70R18M/C 70H CRF1100A/D 2.866 Bias-ply, tube 1.888 Front CRF1100A4/D4 1.480 Bias-ply, tubeless 1.230 Tire type CRF1100A/D 1.064 Radial, tube 0.972 Rear Gear ratio CRF1100A4/D4 CRF1100D/D4 Radial, tubeless...
Page 355 API service label, AX41TF L Recommended SAE 10W-30, JASO T 903 standard MA, Pro METZELER KAROO STREET Recommended engine oil Honda GN4 4-stroke oil (USA & Canada) or Tire CRF1100A/D Honda 4-stroke oil, or an equivalent BRIDGESTONE BATTLAX motorcycle oil ADVENTURECROSS TOURER...
Page 356 19 lbf·ft (26 N·m, 2.7 kgf·m) Recommended Skid plate bolt B 9 lbf·ft (12 N·m, 1.2 kgf·m) drive chain Pro Honda HP Chain Lube or equivalent CRF1100A4/D4 lubricant Spark arrester mounting bolt 6.6 lbf·ft (9.0 N·m, 0.9 kgf·m) Drive chain Bolt 6.6 lbf·ft (9.0 N·m, 0.9 kgf·m)
Page 357 Information Record Engine No. Color Label & Code Owner's Name Address City/State Phone Dealer's Name Address City/State Phone Service Manager...
Page 358 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

This manual is also suitable for:

Crf1100a Crf1100d Crf1100a4 Crf1100d4

Honda Africa Twin 2021 Manual

Table of Contents

Maintenance

Troubleshooting

Information

Quick Links

Chapters

Related Manuals for Honda Africa Twin 2021

Summary of Contents for Honda Africa Twin 2021

This manual is also suitable for:

Table of Contents