Table of Contents
Advertisement
CLUTCH/GEARSHIFT LINKAGE
Record the amount of projection and direction of the spring
pin as against lifter arm ahaft.
Drive i n the spring pin to the same height as the outside
diameter of lifter arm shaft using a commercially available 3
mm pin driver.
Remove the lifter arm and spring.
INSPECTION
Check the dust seal fatigue or damage.
Replace these parts i f necessary.
NOTE:
If the dust seal replacement i s required, press the dust seal to
the case surface.
Check the clutch lifter arm for damage or bending.
Check the spring for fatigue or damage.
Replace these pans i f necessary.
Remove the right crankcase cover plate and bolts.
Remove the right crankcase rubber camper from the right
crankcase cover.
9-4
LIFTER ARM
I
GI
!
/
RIGHT CRANKCASE RUBBER DAMPER
\
Advertisement
Chapters
Table of Contents
