Programmable Wireless Input 3 - DAAB EP104 Instruction Manual

Programmable wireless input 3

No. Name
r001 Readout of received wireless input
0 No wireless reception
1 Wireless input 1 is receiving a wireless signal
2 Wireless input 2 is receiving a wireless signal
3 Wireless input 3 is receiving a wireless signal
4 Wireless input 4 is receiving a wireless signal
r360 Control function
0 Disabled
1 Open
2 Close
3 Stop
4 Open/close
5 Open/stop/close
r362 Half operation
1 Motor 1
2 Motor 2
3 Motor 1 and Motor 2
r363 Limited opening
0 Disabled
1 Time opening according to set time in channel C412/C414 or number of degrees in L116/L126 if
encoder is used.
r370 Disable operation at wireless input 3.
0 Disabled, normal operation. (Programmable input has no function for wireless input 3)
1 Operate only if there is a signal at programmable input 1
2 Operate only if there is a signal at programmable input 2
3 Operate only if there is a signal at programmable input 3
4 Operate only if there is a signal at programmable input 4
5 Operate only if there is a signal at programmable input 5
6 Operate only if there is a signal at programmable input 6
r380 Park
0 Disabled
1 Park without automatic closing Reset by another control signal
r390 Interlock opening
0 Disabled
1 Sends a normal open signal to the remote door
76
DAAB AUTOMATIC CONTROL UNIT EP104
Range Factory Setting Ref.
0 - 4 0
0 - 5 0
1 - 3 3
0 - 1 0
0 - 6 0
0 - 1 0
0 - 1 0
Bruksanvisning utgåva 1 för Programversion 4.06
page
34