General Time Channels - DAAB EP104 Instruction Manual

General time channels.

No. Name
C401 Running time readout, motor 1
C402 Running time readout, motor 2
C403 Set limited running time
C411** Time readout, opened to closed position motor 1,
used for C412
C412** Set limited opening, motor 1
C413** Time readout, opened to closed position motor 2,
used for C414
C414** Set limited opening, motor 2
C422** Run-on time following limit switch open, motor 1
C423** Run-on time following limit switch closed, motor 1
C432** Run-on time following limit switch open, motor 2
C433** Run-on time following limit switch closed, motor 2
C436 Type of stop during run-on time when closing,
S
subordinated to C448 and C449
0 Time
1 Time or load guard
2 Time or safety edge
3 Time, load guard or safety edge
C448 Safety edge reverse during run-on time in the
S
closing movement, C423, C433, L117, L127
0 Function disabled
1 Safety edge reverse during run-on time
2 Safety edge reverse during run-on time and during the time in C492
C449 Reverse after run-on time if load guard is triggered,
S
C423, C433, L117, L127
0 Disabled
1 Reverse
C460 Delay of open motor 2 and close motor 1. Used
with magnetic locks or if the door halves overlap
C470 Delay before first motor starts, used for magnetic
locks that need to lose residual magnetisation
C490 Gradual slowdown in connection with direction
change and stop, Soft stop (only in connection with
frequency converter)
0 Disabled
1 Enabled
C491 Delay of change of direction when INP6 is
S
activated. (Only when P600 is set to 2, safety
input).
44
DAAB AUTOMATIC CONTROL UNIT EP104
Range Factory Setting Ref.
000-999 seconds
000-999 seconds
001-999 seconds 001
00.0-99.9 seconds
00.3-99.9 seconds 05.0
00.0-99.9 seconds
00.3-99.9 seconds 05.0
0.00-7.99 seconds 0.00
0.00-7.99 seconds 0.00
0.00-7.99 seconds 0.00
0.00-7.99 seconds 0.00
0 - 3 3
0 - 2 2
0 - 1 1
0.1-9.9 seconds 0.1
0.00-0.99 seconds 0.00
0 - 1 0
0.1-4.0 seconds 0.8
Bruksanvisning utgåva 1 för Programversion 4.06
page