Programmable Output 4 - DAAB EP104 Instruction Manual

DAAB AUTOMATIC CONTROL UNIT EP104

Programmable output 4

No. Name
o400 Function of output 4
0 Disabled
1 Position indication/Movement/Warning. Signal as configured in o410 – o422
2 Presence sensor/Direction sensing. Signal as configured in o491
3 Lock
4 Alarm output Signal as configured in o430 – o439
o410 Open position
0 Disabled
1 Constant signal
2 Flashing signal
o411 Mid position
0 Disabled
1 Constant signal
2 Flashing signal
o412 Closed position
0 Disabled
1 Constant signal
2 Flashing signal
o413 Movement
0 Disabled
1 Constant signal in the opening movement
2 Constant signal in the closing movement
3 Constant signal in the opening and closing movement
4 No signal during movement, used in combination with o410, o411 and o412.
5 Flashing signal in the opening movement
6 Flashing signal in the closing movement
7 Flashing signal in the opening and closing movement
o414 Delayed switch-off Switch off after the specified
time For example to switch off lighting a specified
time after closing
o420 Warning time before start
o421 Warning function in combination with o420
1 Constant signal before park and automatic closing
2 Constant signal before close signal, park and automatic closing
3 Constant signal before all signals
4 Flashing signal before park and automatic closing
5 Flashing signal before close signal, park and automatic closing
6 Flashing signal before all signals
Bruksanvisning utgåva 1 för Programversion 4.06
Range Factory Setting Ref.
0 - 4 0
0 - 2 0
0 - 2 1
0 - 2 1
0 - 7 0
0.00-9.59 minutes 0.00
0.00-9.59 minutes 0.00
1 - 6 1
page
63