Programmable Input 5 - DAAB EP104 Instruction Manual

DAAB AUTOMATIC CONTROL UNIT EP104

Programmable input 5

No. Name
P500 Channels in programmable input 5
0 Disabled
1 Enabled
P560 Control function
0 Disabled
1 Open
2 Close
3 Stop
4 Open/close
5 Open/stop/close
P561 Type of control signal when activated
1 Pulse
2 Signal for as long as the input is activated
P562 Half operation
1 Motor 1
2 Motor 2
3 Motors 1 and 2
P563 Limited opening
0 Disabled
1 Time opening according to set time in channel C412/C414 or number of degrees in L116/L126 if
encoder is used.
P570 Motor lock
0 Disabled
1 The barrier cannot be operated without a signal at programmable input 5. If the signal disappears the
barrier is stopped.
P575 Opening via input after activation during set time,
input will not open the barrier until it has been
activated for the set time.
P580 Park
0 Disabled
1 Automatic closing disabled after the input is activated, reset by another control signal
2 Automatic closing disabled by a constant signal
P590 Interlock opening
0 Disabled
1 Opens the local door if P560 is set to open, and passes the signal on to the remote door
P596 Blocking disabled for local and remote doors. Works
only with a constant signal.
0 Disabled
1 Active
P598 Automatic closing disabled for remote door Only
works if there is a constant signal
0 Disabled
1 Active
Bruksanvisning utgåva 1 för Programversion 4.06
Range Factory Setting Ref.
0 - 1 1
0-5 0
1 - 2 1
1 - 3 3
0 - 1 0
0 - 1 0
0.0-9.9 seconds 0.0
0 - 2 2
0 - 1 0
0 - 1 0
0 - 1 0
page
28
71