Programmable Output 3 - DAAB EP104 Instruction Manual

Programmable output 3

No. Name
o300 Function of output 3
0 Disabled
1 Position indication/Movement/Warning. Signal as configured in o310 – o322
2 Presence sensor/Direction sensing. Signal as configured in o391
3 Lock
4 Alarm output Signal as configured in o330 – o339
o310 Open position
0 Disabled
1 Constant signal
o311 Mid position
0 Disabled
1 Constant signal
o312 Closed position
0 Disabled
1 Constant signal
o313 Movement
0 Disabled
1 Constant signal in the opening movement
2 Constant signal in the closing movement
3 Constant signal in the opening and closing movement
4 No signal during movement, used in combination with o310, o311 and o312.
o314 Delayed switch-off Switch off after the specified
time For example to switch off lighting a specified
time after closing
o320 Warning time before start
o321 Warning function in combination with o320
1 Constant signal before park and automatic closing
2 Constant signal before close signal, park and automatic closing
3 Constant signal before all signals
o322 Function during warning time
1 Output signal deactivated during warning
2 Signal as configured in o310-o313
o330* Alarm if there is an error as configured in
o331-o339. The alarm is activated for at least the
time set in this channel.
o331* Alarm for faulty safety edge. Time as in o330.
0 Disabled
1 Constant signal
o332* Alarm for error message in display
0 Disabled
1 Constant signal
* = Only when o300 is set to 4.
60
DAAB AUTOMATIC CONTROL UNIT EP104
Range Factory Setting Ref.
0 - 4 1
0 - 1 1
0 - 1 0
0 - 1 0
0 - 4 4
0.00-9.59 minutes 0.00
0.00-9.59 minutes 0.00
1 - 3 1
1 - 2 1
0.00-9.59 minutes 0.00
0 - 1 0
0 - 1 0
Bruksanvisning utgåva 1 för Programversion 4.06
page