Channel Reference; General, C Channels; General Readout Channels - DAAB EP104 Instruction Manual

DAAB AUTOMATIC CONTROL UNIT EP104

Channel reference

There are six channel categories, each with its own letter and each handling different functions in the card.
• C channels: General readout and configuration channels.
• d channels: Channels relating to the DB402 vehicle detector.
• L channels: Channels relating to limit switches and timer control and the DB405 encoder.
• o channels: Channels relating to the DB401 output card.
• P channels: Channels relating to programmable inputs.
• r channels: Channels relating to functions of the DB403 and DB404 wireless cards.
There is a reference column for each channel, showing where you can find more details and examples of how to use the channel,
and the functions you can access with the channel.
Channels with a grey background are readout channels so they cannot be changed.
The S symbol means that the channel is a safety setting, and any change in value must be documented in the log book, with
a name and date.

• General, C channels

General readout channels

No. Name
C001 Software version
C002 Release of software version
C005 Voltage after stop circuit
C014 Number of openings x1
C015 Number of openings x1000
C019 Time remaining to automatic closing
C020 Most recent cause of motor stop
01 Limit switch motor 1 open
02 Limit switch motor 1 closed
03 Limit switch motor 2 open
04 Limit switch motor 2 closed
10 Stop
21 Photocell during opening movement
22 Photocell during closing movement
31 Loop 1 during opening movement
32 Loop 1 during closing movement
33 Loop 2 during opening movement
34 Loop 2 during closing movement
41 Safety edge opening reverse
42 Safety edge opening stop
43 Safety edge closing reverse
44 Safety edge closing stop
52 Photocell input 6 closing
Bruksanvisning utgåva 1 för Programversion 4.06
Range Factory Setting Ref.
00.0 – 30.0 V
000-999
000-999
0.00-9.59 minutes
page
37