Load Guard And Motor Settings - DAAB EP104 Instruction Manual

DAAB AUTOMATIC CONTROL UNIT EP104

Load guard and motor settings

No. Name
C200 Load guard function
0 Disabled Service and troubleshooting only
1 Reverse when closing, stop when opening
2 Stop when closing and reverse when opening
3 Reverse when closing and opening
4 Stop when closing and opening
C201 Low current limit active, inactive only with
S
frequency converter (C202 = 4).
0 Inactive
1 Active
C202 Type of power supply
S
0 3x400 V with neutral
1 3x230 V without neutral
2 1x230 V with neutral, asymmetric
3 3x400 V without neutral (see separate instructions)
4 Frequency converter (see separate instructions)
5 1x230 V with neutral, symmetric
C205 Load guard for personal protection active during the
closing movement
0 Disabled
1 Active
C211 Load guard delay
S
C212 Load guard, connection delay on start, all starts
C221 Motor protection delay
C230 Set motor power readout for personal protection,
motor 1
C231 Motor power readout, motor 1
C232 Set load guard limit for motor 1 opening
C233 Set load guard limit for motor 1 closing
C240 Set motor power readout for personal protection,
motor 2
C241 Motor power readout, motor 2
C242 Set load guard limit for motor 2 opening
C243 Set load guard limit for motor 2 closing
C251 Motor current readout, motor 1
C252 Set motor current readout, motor 1 opening
S
C253 Set motor current readout, motor 1 closing
S
•
Bruksanvisning utgåva 1 för Programversion 4.06
Range Factory Setting Ref.
0 – 4 3
0 – 1 1
0 - 5 0
0-1 1
0.01-2.50 seconds 0.06
0.1-2.5 seconds 1.0
3.0-5.0 seconds 3.0
0.00 and 0.12-0.35 0.20
kW
0.00-1.99 kW
0.05-1.99 kW 0.60
0.05-1.99 kW 0.60
0.00 and 0.12-0.35 0.20
kW
0.00-1.99 kW
0.05-1.99 kW 0.60
0.05-1.99 kW 0.60
0.0-20.0A
0.0 and 0.5-6.0A 1.0
0.0 and 0.5-6.0A 1.0
page
21
41