Replace Task Light Switch - GE 9100c Technical Reference Manual

9.14 Replace task light switch

M1207026
M1207027
Reproduced from the electronic master in MATRIX
1. Remove the upper shelf. (Section 9.4)
2. Using a small needle-nose pliers, disconnect the switch
harnesses of the task-light circuit board connectors.
3. Remove the switch from the top shelf using the small needle-
nose pliers.
4. To replace the switch, reassemble in reverse order.
Connectors
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
9 Repair Procedure
Switch
9-31