After Replacing The Dmb (Display Module) - GE 9100c Technical Reference Manual

9100c

8.2 After replacing the DMB (Display Module)

8-4
M1207027
Reproduced from the electronic master in MATRIX
1. Activate the appropriate options on the Function Upgrade menu
(Section 4.6.1) following the steps below.
• Enter the Service Mode.
• Select Function Upgrade.
• Enter the appropriate Key Code to restore the original
Function Upgrade options
2. Record the new (web site generated) Key Code on a sticker. .
3. Affix the BID label provided in the replacement Display Monitor
Board kit (or on the Display Module) and the Key Code sticker to
the left side panel of the Display Module.
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
M1207026