Replace Cylinder Check Valve - GE 9100c Technical Reference Manual

9100c
CAUTION
9.6.4 Replace
cylinder check valve
9-12
M1207027
Reproduced from the electronic master in MATRIX
Be careful not to crush the filter. Do not thread in the
screw more than two full turns.
4. Remove the filter.
5. Install the new filter and brass retaining ring.
6. Install the inlet adapter in the cylinder yoke.
7. Perform the checkout procedure (Section 3).
The cylinder check valve is not a replaceable item. If the check valve
is defective, you must replace the complete cylinder supply module.
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
M1207026