GE Healthcare
3 Route Survey
3.1 Step One — Sketch
Start preparing Route Survey by sketching a floor plan of the hospital or clinic which will receive
the equipment. Include all areas on the delivery route from outside the building to destination. See
Illustration
7-11.
Reference Numbers: Numbers in circles refer to Route Survey data. The Route Survey is a form
on which site data are listed (see
3.2 Step Two — Survey
Data concerning the intended delivery route are recorded on the Route Survey in the following
pages. Record all loading capacities, corridor widths, door openings, turning radii, flooring
materials, elevator sizes, obstructions and so on.
3.3 Step Three — Check
Verify equipment can be transported via the route specified in
compiled in
Section 3.2
directions.
Chapter 7 Additional Planning Aids
Innova 2121-IQ/3131-IQ Biplane Cardiovascular Imaging System Pre-Installation Manual
Section
to equipment specifications in this and other applicable pre–installation
3.2).
Illustration 7-11:
Direction 5177951-4-1EN, Revision 1
Section
3.1. Compare Route Survey
199