Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare
3 Route Survey
3.1 Step One — Sketch
Start preparing Route Survey by sketching a floor plan of the hospital or clinic which will
receive the equipment. Include all areas on the delivery route from outside the building to
destination. See
Reference Numbers: Numbers in circles refer to Route Survey data. The Route Survey is a
form on which site data are listed (see
Illustration 7-8:
3.2 Step Two — Survey
Data concerning the intended delivery route are recorded on the Route Survey in the
following pages. Record all loading capacities, corridor widths, door openings, turning radii,
flooring materials, elevator sizes, obstructions and so on.
3.3 Step Three — Check
Verify equipment can be transported via the route specified in
Survey compiled in
pre–installation directions.
210
Illustration 7-8
.
Section 3.2
to equipment specifications in this and other applicable
Direction 5314528-2-1EN, Revision 1
Section 3.2
).
Section 3.1
. Compare Route
3 Route Survey