Route Survey; Step One - Sketch; Step Two - Survey; Step Three - Check - GE Innova IGS 520 Preinstallation Manual

3.4 Route Survey

3.4.1 Step One — Sketch
Start preparing Route Survey by sketching a floor plan of the hospital or clinic which will receive
the equipment. Include all areas on the delivery route from outside the building to destination.
See Illustration
Reference Numbers: Numbers in circles refer to Route Survey data. The Route Survey is a form
on which site data are listed (see
3.4.2 Step Two — Survey
Data concerning the intended delivery route are recorded on the Route Survey in the following
pages. Record all loading capacities, corridor widths, door openings, turning radii, flooring
materials, elevator sizes, obstructions and so on.
3.4.3 Step Three — Check
Verify equipment can be transported via the route specified in
Survey compiled in
installation directions.
40
Innova IGS 520, Innova
TM
1-12.
Section
Section 3.4.2 to equipment specifications in this and other applicable pre–
IGS 530, Innova
TM
3.4.2).
Illustration 1-12:
IGS 540 Pre-Installation Manual
TM
Direction 5499972-1-1EN, Revision 2
Section 3.4.1. Compare Route
3 Delivery Requirements