Accessories - Edwards STP-XF803 Series Instruction Manual

8.4

Accessories

8
The following is a list of accessories that can be purchased by contacting Edwards.
Items
Instruction Manual (A)
Instruction Manual (B)
Instruction Manual (C)
Instruction Manual (D)
STP control unit
*2
Power cable
Power extension cable
STP connection cable
TMS heater cable
TMS sensor cable
*2
TMS valve
STC-U remote cable
Outlet port heater cable
*1
STP pump consists of the four-volumed Instruction Manuals.
*2
Optional accessory
MT-00E-2A1-C
Page 56
STP Series Turbomolecular Pump
Application purpose
*1
Generic Instruction Manual
*1
Pump Specific Information
*1
Control unit Instruction Manual
applicable to your STP pump
*1
For STC-U eTMS unit
For control the STP pump
Primary input power
*2
Power extension cable which supplies
power from STC-U to STP control unit
*2 Connection cable between the STP
pump and the STP control unit
*2
Connection cable between STC-U and
TMS heater of STP pump
Connection cable between STC-U and
*2
temperature sensor of STP pump
TMS valve controls the cooling water
in order to maintain a constant
temperature inside the STP pump
*2
Connection cable between STC-U and
STP control unit
*2
Remarks
This manual
Refer to the STP Pump
Instruction Manual (B) for the
applicable STP control unit.
No shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information.
Standard cable length is 5m.
Contact Edwards for further
information.
Shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information. The cable type
varies depending on STP pump
to be connected. Refer to
Instruction Manual (B).
Shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information.