Table of Contents
Advertisement
User's Manual
Search
All Channels: Selecting
It is the same as pressing the
Triplex: Selecting
of the selected camera. It is the same as pressing the
Setup
(Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter 3 ─ Configuration
Selecting
for detailed descriptions of system setup.
Status
Selecting
(Status) in the Live Monitoring menu allows you to check the status of the DVR's system, inputs and storage.
Refer to the following Status Monitoring section for details.
NOTE: Selecting Status will only be enabled for a user who has System Check authority.
Active Cameo Mode
You can enter the Active Cameo mode by selecting Edit Group from the Live Monitoring – Camera menu or pressing
and holding the
MENU
button for three seconds or longer in any multi-view format. The yellow outline surrounding
the video indicates the active cameo, and pressing the arrow buttons moves the active cameo. Pressing the
button exits the Active Cameo mode. Selecting Exit Group Edit in the cameo menu displayed when pressing the
MENU
button also exits the Active Cameo mode. The active cameo mode will remains in effect for 15 seconds if
there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.
Zoom Mode
You can enlarge an area of the video by pressing the
the
button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move
ZOOM
the rectangle around using the arrow buttons. Pressing the
in rectangle. Exit the Zoom mode by pressing the
Zoom is selected in the Display setup screen (OSD tab).
NOTE: The available enlargement ratio is different from camera mode.
PTZ Mode
If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Press and hold the
longer to display the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon
60
(Search) → All Channels exits the live monitoring mode and enters the search mode.
button.
SEARCH
(Search) → Triplex enters the Triplex mode. Selecting the camera number plays back video
ZOOM
ZOOM
SEARCH
button when in one of the multiview formats.
button on the front panel. For a few seconds after pressing
(Play/Pause) button in the Zoom mode enlarges the area
button. While in the Zoom mode, the icon
button on the front panel for three seconds or
PTZ
displays on the PTZ camera screen.
(Play/Pause)
displays if
Advertisement
Table of Contents
