User's Manual
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
Camera Buttons (1 to 16)
Pressing the individual camera buttons will cause the selected camera to display full screen.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made during system setup.
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the Up and Down arrow buttons to increase or decrease the number's value. These
buttons are also used to control Pan and Tilt when in the PTZ mode.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
counter-clockwise and clockwise.
Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode.
Menu Button
button enters the Setup screen. You will need to enter the authorized user and password to access
Pressing the
MENU
Setup. Pressing the button also closes the current menu or setup dialog box. In the Playback mode, pressing the button
displays the Search menu. In the Search mode clip-copying can be done instantly by pressing and holding the button
for three or more seconds.
ZOOM Button
Pressing the
button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing
ZOOM
what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.
8
ID Button
Monitor Buttons
Display Button
Sequence Button
Camera Buttons
Triplex Button
Audio Buttons
Focus Near/Far Button
Menu Button
Enter Button
Panic Button
Stop Button
RW Button
FF Button
Figure 4: Infrared remote control.
Alarm Button
Freeze Button
Clip Copy Button
Bookmark Button
Zoom In/Out Button
Preset Set/View Button
PTZ Mode Button
Arrow Buttons
Zoom Mode Button
Play Button
Pause Button
Next Button
Previous Button