5.
Press the OK button to save changes.
The menus will be displayed.
6.
Press the MENU button repeatedly to exit the menu.
7.
Adjust aperture.
At default settings, aperture can be adjusted using the front dial.
8.
Press the shutter button all the way down to ready the camera.
The camera is ready to shoot when [Ready for composite
shooting] is displayed.
9.
Press the shutter button to start shooting.
Live composite photography will start. The display will be updated after each exposure.
10.
Press the shutter button again to end shooting.
Shooting ends automatically after the time selected for [Live Composite Timer]. This can be
changed.
g
The maximum recording time available varies with battery level and shooting conditions.
Some limitations apply to the choice of ISO sensitivity settings available.
C
The following cannot be used:
C
-
sequential shooting, the self-timer, interval timer photography, AE bracketing, flash bracketing,
focus bracketing, HDR photography, High Res Shot, Focus Stacking, multiple exposure, keystone
compensation, live ND shooting, live GND shooting, and fisheye compensation.
Starry sky AF can be used for shots of the night sky.
B
AF Mode)"
(P.100),
n
Display brightness can be adjusted during live composite photography.
B
TIME/COMP Settings (BULB/TIME/COMP Settings)" (P.269)
The exposure time for each exposure made during live composite photography can be chosen
B
in advance using the menus.
Settings)" (P.269)
"Configuring BULB/TIME/COMP Settings (BULB/TIME/COMP Settings)" (P.269)
"Changing the settings of Starry Sky AF (Starry Sky AF Setting)" (P.119)
"Configuring BULB/TIME/COMP Settings (BULB/TIME/COMP
g
"Choosing a focus mode (
g
Lighten Blending (
72
1023
1023
[ 1 : 02 : 03 ]
[ 1 : 02 : 03 ]
F F
1
1
1
L
100 %
100 %
Ready for composite shooting
-
0 0
+
B B
LiveComp
LiveComp
5.6
5.6
0.0
0.0
F
F
AF Mode /
K
"Configuring BULB/
g
B
: Live Composite
Photography)
60p L - 8 L - 8
60p
1
4K
S - AF
S - AF
3 3
200
200
ISO
ISO
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel