OM SYSTEM OM-1 Mark II Instruction Manual page 427

6.
Follow the on-screen instructions in OM Image Share to scan the QR code and adjust
connection settings.
If you are unable to scan the QR code, follow the on-screen instructions in OM Image Share
to adjust settings manually.
®
- Bluetooth
camera monitor into the Bluetooth settings dialog in OM Image Share.
- Wi-Fi: To connect, enter the SSID and password displayed on the camera monitor into the
Wi-Fi settings dialog in OM Image Share.
on the screen will turn green when pairing is complete.
A
The Bluetooth
-
: The camera is emitting wireless signal.
C
-
: Wireless connection has been established.
D
7.
To end the Wi-Fi connection, press MENU on the camera or tap
You can also turn the camera off and end the connection from OM Image Share.
At default settings, Bluetooth
terminated, allowing you to shoot remotely with a smartphone. To set the camera to also
terminate Bluetooth
[Off].
: To connect, select the local name and enter the passcode displayed in the
®
icon indicates the status as follows:
®
connection is kept active even after Wi-Fi connection is
®
connection when terminating Wi-Fi connection, set [Bluetooth] to
Pairing the Camera and Smartphone (Wi-Fi
427
on the monitor screen.
B
Connection)