Ending The Connection; Ending The Current Connection - OM SYSTEM OM-1 Mark II Instruction Manual

Ending the Connection

End the Wi-Fi connection. The use of Wi-Fi may be prohibited in some countries or regions, in which
case Wi-Fi should be disabled.

Ending the Current Connection

1.
Tap in the camera monitor.
J
You will be prompted to confirm whether you wish to
disconnect.
The network SSID is shown in the display.
2.
Highlight [Disconnect] using
The camera will terminate the connection and exit to the shooting display.
The Wi-Fi connection will be disconnected even if there is data that has yet to be transferred.
C
Any data that has not yet been uploaded will not be uploaded.
3.
To reconnect, tap
button.
The camera will automatically reconnect to previously-selected networks.
To connect to a new network, highlight [Maintain] in Step 2 and press the OK button. Choose from
a list of available networks and adjust settings as described in
(Connect from
z
and press the OK button.
FG
or select [Wi-Fi Connection] > [PC Connection] and press the OK
J
List)" (P.447).
"Choosing a Network from a List
451
1023 1023 [ 1 : 02 : 03 ] [ 1 : 02 : 03 ]
L
1 1 1
100 % 100 %
- 0 0 +
P P
250 250 5.6 5.6
1/ 1/ F F
PC
PC Connection
SSID:SSID_001
Wi-Fi is active
Disconnect
Maintain
MENU
Ending the Connection
60p L - 8 L - 8
F F 4K 60p
1
S - AF S - AF
3 3
ISO ISO
0.0 0.0 200 200
Auto Auto
OK