OM SYSTEM OM-1 Mark II Instruction Manual page 201

Pro Capture SH2 (ProCap SH2)
The camera shoots at up to 50 fps. A maximum of 99 frames can be captured before the shutter button
is pressed all the way down. If [C-AF], [C-AF
Mode] (P.100), the camera will focus before each shot.
The [ProCap SH2] mode is only available with specific lenses. Visit our website for details.
C
Using [C-AF], [C-AF
C
larger than F8 in [ProCap SH2] mode, the focus accuracy will decrease.
screen.
In [ProCap SH2] mode, the lower limit of the shutter speed is 1/640 s when [Max fps] under
C
[Sequential Shooting Settings] is set to [50fps] and 1/160 s when it is set to [25fps], [16.7fps], or
[12.5fps].
Button
Button
gYA UHIi
Super control panel
OK Drive (
U g
Menu
MENU
U a U
1.
Select ProCap, ProCap SH1, or ProCap SH2 and press the OK button.
2.
Press the shutter button halfway to start capturing.
When the shutter button is pressed halfway, a capture icon
( ) will be displayed. If the button is kept pressed halfway
D
for over a minute, capture will end and the
from the display. Press the shutter button halfway again to
resume shooting.
Shooting will continue while the shutter button is pressed
all the way down, up to the number of shots selected for
[Frame Count Limiter].
[Max fps], [Pre-shutter Frames], and [Frame Count Limiter] can be adjusted in
B
[Sequential Shooting Settings]
3.
Press the shutter button all the way down to start saving pictures to the memory card.
], [C-AF+TR] or [C-AF+TR
J
/ )
Y
7. Drive Mode Drive
U
(P.193).
], [C-AF+TR], or [C-AF+TR
J
] AF mode (P.100) and an aperture value
J
/
g Y
icon will clear
D
Shooting without a release time lag (Pro Capture
201
] is selected for
J
F will be displayed on the
N
1023 1023 [ 1 : 02 : 03 ] [ 1 : 02 : 03 ] F F
1 1 1 L
100 % 100 %
-
P P 0 0 +
250 250 5.6 5.6
1/ 1/ F F
[ AF
K
60p L - 8 L - 8
60p
1 4K
S - AF S - AF
3 3
0.0 0.0 ISO ISO 200 200
Auto Auto
shooting)