Sleep Mode - OM SYSTEM OM-1 Mark II Instruction Manual

Sleep Mode

If no controls are used for a set period, the camera will automatically enter suspend operation to
reduce the drain on the batteries. This is referred to as "sleep mode".
When the camera enters sleep mode, the monitor will turn off and operation will be suspended.
Pressing the shutter or
If no operations are performed for a set period after the camera enters sleep mode, the camera will
turn off automatically. The camera can be reactivated by turning it on again.
The camera may require additional time to recover from sleep mode when [On] (enabled) is
C
selected for [ Settings] > [Power-off Standby].
Q
Off (Power-off Standby)" (P.429)
The delay before the camera goes to sleep or turns off automatically can be selected in the menu.
B
"Setting Sleep (Power Saving) Options (Sleep)"
g
Power Off)" (P.412)
button reactivates the camera.
q
"Wireless Settings for When the Camera Is
g
(P.411), "Setting Auto Power Off Options (Auto
40
Turning the camera on